USB write protect

USB write protect

Parasite

JF-Expert Member
Joined
Aug 20, 2013
Posts
613
Reaction score
580
polen na majukumu wadau wa jukwaa,kwanza naomba samahan sana wanajamamvi hili.naomba msaada wenu kwa yeyote anaefahamu.jinsi yakuondoa write protect mode kwenye flashi samahan sana naomba kwa anaefahamu anijuze kwa njia yoyote ile plz
 
Zipo njia nyingi sana kwenye internet ambazo haziwezi kukusaidia... Na ukifanikiwa basi mshukuru sana Jah.

Nimekumbana na tatizo kama hilo when i was 16ish niliangaika nalo sana tena my Usb was Kingston, solution i was choosed was to buy New.
Just forwadly wait for others reply.
 
poa ndugu but naamin kuna watu ama ndugu ambao tayari wameshakumbana na tatizo kama hili plz tunaomba msaada wenu
 
kama haina data za mhimu jaribu kuformat, pia ngoja nikutafutie tutorial yoyote nakutupia hapo chini sasa hivi
 
[h=1]How to Remove Write Protection from a USB Drive[/h]
200402409-001_XS.jpg


Write protection, when applied to a USB drive, prevents unauthorized users from adding to, changing or deleting anything contained on the drive. Using write protection, you can circulate the drive among several users with the assurance that each user will see the same message. You can also prevent inadvertent deletion of the drive's data. To permanently remove write protection from your USB drive, you need to format the drive. Before doing so, copy any files you want to save to another storage unit.

[h=2]Permanently Remove Write Protection[/h]
[h=4]Step 1[/h] Insert the USB flash drive into a USB 2.0 port and turn on your computer. Click the "Start" button and then select "Computer." Note the drive letter of the USB drive, which is labeled as "Removable Disk."

[h=4]Step 2[/h] Click "Start | All Programs | Accessories | Command Prompt" to open a Command Prompt window.

[h=4]Step 3[/h] Type the drive letter assigned to the USB drive followed by a colon; for example, type "E:" (without quotation marks). Press "Enter."

[h=4]Step 4[/h] Type "format" and the drive letter followed by a colon; for example, type "format E:" (without quotation marks). Press "Enter."

[h=4]Step 5[/h] Close the Command Prompt window when the operation is complete. Write protection has been removed from the USB drive.

[h=2]Temporarily Remove Write Protection through the Drive Letter[/h]
[h=4]Step 1[/h] Click the "Start" button and then select "Computer." Right-click the icon for the USB drive (labeled as "Removable Disk") and select "Properties."

[h=4]Step 2[/h] Click the "Sharing" tab and click the "Advanced Sharing" button.

[h=4]Step 3[/h] Click the "Permissions" button to access the list of permissions. Select the "Full Control" check box under Allow for full read, write and change permissions. Click "OK" twice and click "Close."

[h=2]Temporarily Remove Write Protection through the Registry[/h]
[h=4]Step 1[/h] Click the "Start" button, type "regedit" (without the quotation marks) in the Search Programs and Files box and press "Enter" to open the Registry Editor.

[h=4]Step 2[/h] Navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrrentControlSet\Control\StorageDevicePolicies." Right-click "WriteProtect" and select "Modify." Change the Value Data to "0" and click "OK."

[h=4]Step 3[/h] Add "StorageDevicePolicies" if it does not exist. Select the "Control" folder in the left navigation pane. On the "Edit" menu, point to "New" and click "Key." Type "StorageDevicePolicies" (without quotation marks) and press "Enter." Right-click in the right pane, point to "New" and select "DWORD (32-Bit) Value." Type "WriteProtect" (without quotation marks) and press "Enter." Close the Registry Editor.

[h=4]Tips[/h]
  • If the USB flash drive does not appear on the Computer page, refresh the screen or reboot the computer until it does. If the USB flash drive does not eventually appear, it may be defective. Try opening it on another computer before discarding it. Make sure the USB drive is not open and no other programs are using it.

[h=4]Warnings[/h]
  • Remember to back up the registry before completing the steps. The "Format" command permanently deletes all data from the drive. Save what you want before formatting the drive.

[h=4]References[/h]

[h=4]Resources[/h]
 
Kuna baadhi ya flash zina button pemben . Ambayo ikiwa ON flash inakuwa write protected
Ikiwa OFF haina write protection.
 
nashukuru kwa ushirikiano but nikitumia ile njia ya pamanent remove yakutumia cmd prompt inaniletea msg "access denied as you don't have privileges",you have to invoke this utility running in elevated mode"so mkuu fadhili na wengine wenye maujanja plz tusaidiane jamani
 
hicho kitu nafikiri tumewai jadili hapa ila haikupatikana njia ya kuiponya flash...
Keep struggling labda uone mwisho wa siku tupe updates hapa
 
hilo ni tatizo la hardware na nimeliondoa mara nyingi tuu, kuna chip inakua na problem kwenye motherboard yake, njia zote za software hazifanyi kazi zilinitesa sana awali.
 
ndugu jamaa polen na majukumu natumai mko vema,ni wasaa mwingine tena hebu tupien walau michango yenu kidogo inamaana hili tatzo hakuna aliyewahi kulitatua tangu limeanza kusikika au tunabaniana??tusaidiane jamani.
 
nashukuru kwa ushirikiano but nikitumia ile njia ya pamanent remove yakutumia cmd prompt inaniletea msg "access denied as you don't have privileges",you have to invoke this utility running in elevated mode"so mkuu fadhili na wengine wenye maujanja plz tusaidiane jamani

M nililitatua kwa button iko kando ya frash drive, unakisogeza
 
Inaleta access denied coz huna administrative privileges xo solution ni kubonyeza start button then type cmd ikija usibonyeze enter badala yake bonyeza right click hlf chagua run as administrator then continue na process zako kwenye cmd. Dnt forget feedback.
 
thank cyberboy nitakujuza ikifanya kazi thank you guy
 
but je,haya yote nayafanya nikiwa nimeconect flash au before??cyber hebu nijuze zaid hapo cjakusoma fresh mkuu
 
Back
Top Bottom