African Satellite World and Sat Gear

African Satellite World and Sat Gear

Uganda NBC feed ... Elections Tally centre ...ses5 4.9degE. Tp 11468 V 3100
 
Its very advisable to factory reset the decoder to allow all changes to take effect.
So*y six not open after i make foctory reset,i try to put new powervu key but nothing going on,please any one can help me to solve this problems.
 
Hello all...over the week I got to try the mystery of the said conical scarler ring
24512296004_ea304d0d94_m.jpg

I managed to lock on MTN channels on NSS 7 at 20W with a 130cm offset getting quality of 28% on Qsat...funny thing am getting picture even if the quality drops to 6%... That's
because the to needs just 1db to get a lock
25104780846_dfe3c41da8_n.jpg


I tried the same on 90cm bt didn't get a lock..Bt the meter registered some noise showing a 100cm would do fine n lock
24847264910_c947eeaac4_n.jpg


Swung the lnb with the scaler ring onto Mesat 91.5°E n got promising results locking on toto 3960V hosting the History HD with a quality of 83% on the Qsat

25143239405_d983138a15.jpg


25049658111_18fd877108_n.jpg
24847296480_d6fabccd9e_n.jpg


The conical scaler can be got at Digital life electronics...nyc weekend all...
 
Thanks Wessly for the remote. It's good to acknowledge forum mates who are true to their word.
 
Hello all...over the week I got to try the mystery of the said conical scarler ring
24512296004_ea304d0d94.jpg
I managed to lock on MTN channels on NSS 7 at 20W with a 130cm offset getting quality of 28% on Qsat...funny thing am getting picture even if the quality drops to 6%... That's because the to needs just 1db to get a lock
25104780846_dfe3c41da8.jpg


I tried the same on 90cm bt didn't get a lock..Bt the meter registered some noise showing a 100cm would do fine n lock
24847264910_c947eeaac4.jpg


Swung the lnb with the scaler ring onto Mesat 91.5°E n got promising results locking on toto 3960V hosting the History HD with a quality of 83% on the Qsat
25143239405_d983138a15.jpg

25049658111_18fd877108.jpg

24847296480_d6fabccd9e.jpg


The conical scaler can be got at Digital life electronics...nyc weekend all...


freddy kindly PM our good friend Limuru, that would be very good news for him
 
Well, you'll need to edit the current VPID: Go to Main Menu, Manual Scan, Select the Frequency you want to edit and press EPG button on RCU. Then go ahead and edit.

In other news e*tv on SES-5 (11785 V 27499) is now $. Viva FTA


Thanks Ish. I have done the edit but still cann't see video of K24.
 
Greetings everybody, please I need assistance on how to go about P**wervu on SRT 4950H, I tracked it with signal of 14% though the info service was stable after inputting the key nothing happened I'm using the latest SW 3.46. Will be very grateful if someone could come to my aid.
Thanks in anticipation.
 
Greetings everybody, please I need assistance on how to go about P**wervu on SRT 4950H, I tracked it with signal of 14% though the info service was stable after inputting the key nothing happened I'm using the latest SW 3.46. Will be very grateful if someone could come to my aid.
Thanks in anticipation.


What sat?
 
KUNGU and rest i need software that will allow ccam work on4930 strong secondly a good lnb is needed for my 4mt prime focus motorized fiber dish the lnb is for off print bird to be shipped to nigeria pls kungu ur attention on this thanks
 
Thanks Ish. I have done the edit but still cann't see video of K24.

I don't think its a VID issue, because I also see Family TV is among the hidden channels, maybe its the compression that has a problem maybe contact iSat/Wananchi Group for a solution.
 
Greetings everybody, please I need assistance on how to go about P**wervu on SRT 4950H, I tracked it with signal of 14% though the info service was stable after inputting the key nothing happened I'm using the latest SW 3.46. Will be very grateful if someone could come to my aid.
Thanks in anticipation.
Which sat, that Signal very low
 
Back
Top Bottom