Hackintosh OSX ndani ya PC


shaipakua iATKOS ml2 lkn 4.9GB how do i go about
maana hakuna CD yenye hiyo capacity
 
njunwa wamavoko said:
shaipakua iATKOS ml2 lkn 4.9GB how do i go about
maana hakuna CD yenye hiyo capacity
Click to expand...

Hapa ndo mziki unapokuja unatakiwa uwe na access na mashine inayo run mac osx at least 10.6.x na kuendelea ili ufanye preparation za usb au HDD bootable kwa ajili ya hyo iatkos ml2. Mi nilitumia mashine ya awali ile pentium 4 niliyo install 10.6 iatkos kufanya hzo preparation hyo ni kwa case ya iAtkos mle (mountain lion). kwa iatkos S3 ambayo nili install kwenye hp pentium 4 niliburn image kwenye DVD ilikuwa na size around 3.5 - 4.5 hivi.
 

Hivo nimepoteza mda wangu kudownload file kubwa ambalo halitonisaidia.... sasa mbona ukunambia requirements I see
mtu mwenye mac computer sijawai hata kumuona
what should i do then
 
njunwa wamavoko said:
Hivo nimepoteza mda wangu kudownload file kubwa ambalo halitonisaidia.... sasa mbona ukunambia requirements I see
mtu mwenye mac computer sijawai hata kumuona
what should i do then
Click to expand...

Aaaaaaa Taratibu kijana tutafika tu.
Kinachohitajika ni sehemu inayo run mac osx 10.6 sio lazima uwe na mashine ya apple unaweza uka install osx kwa kutumia vmware( virtual machine) ndani ya windows yako na uka prepare hizo usb bootable.

Kwa case yangu mm sikutumia mashine yoyote ya apple embu soma hapa chini nilivyofanya

kwanza nili download IATKOS S3 hii ni version inayokubali kwenye mashine (PC) za zamani esp pentium 4 zinazo support SS3.
Na size yake ilikuwa ina fit kwenye dvd ya kawaida. kwa hyo nili burn kwenye dvd ndo nikaitumia kufanya installation kwenye hp dc 7600 hii ni pentium 4 pc. na ilikubali fresh tu
Sasa kwa kutumia hyo pentium 4 ndo nimetumia ku prepare bootable ya IATKOS L2 ambayo ina size kubwa isiyo fit kwa dvd ya 4.7gb. na ndo niliyo install kwenye computer nyingine hp dc5800 core2duo.
Nadhani umenipata.
 

Turudi hapo kwenye mikazo sasa...mm nichukue njia ipi?
Virtual mashine sijui kabisa kufanya au nidownload hiyo iATKOS S3?
 
njunwa wamavoko said:
Turudi hapo kwenye mikazo sasa...mm nichukue njia ipi?
Virtual mashine sijui kabisa kufanya au nidownload hiyo iATKOS S3?
Click to expand...

Embu fanya kuanza na hyo iatkos s3 kwanza kukiwa na maendeleo ndo tuende kwa version zinazofuata.
 
h120 said:
Embu fanya kuanza na hyo iatkos s3 kwanza kukiwa na maendeleo ndo tuende kwa version zinazofuata.
Click to expand...


Mi mwenyewe nilianza na ideneb ambayo ni 10.5.7 nikahamia iatkos s3 ambayo ni (snow leopard 10.6.3) nikatoka hapo nikaja iAtkos L2 ambayo ni (lion 10.7.2). hii ndo naitumia sasa kwenye mashine yangu.
nipo nashughulikia mountain lion ambayo ipo kwenye series 10.8.xxx pamoja na maverick ambayo ni 10.9.xxx.

Umeona sasa nimeanzia chini napanda kidogo kidogo.
 
sasa hiyo kuiweka kwenye CD ulitumia Program gani...au any burning Studio itakubali tu
Isije kuwa na burn hadi DVD tano bila mafanikio na moja inakubali lkn bado kitu ikagoma
 
njunwa wamavoko said:
sasa hiyo kuiweka kwenye CD ulitumia Program gani...au any burning Studio itakubali tu
Isije kuwa na burn hadi DVD tano bila mafanikio na moja inakubali lkn bado kitu ikagoma
Click to expand...

iatkos s3 ipo image ya ISO una burn kwa kutumia software yoyote.
 
UPDATES

Mountain lion 10.8.2 imekubali kuinstall kwenye:
hp dc5800 sff core2duo 2.8ghz
Ram 5gb (minimum unaweza ukatumia 2gb)
HDD 500gb

Distro niliyotumia ni ya Niresh 10.8.2
ipo kwenye torrents kwa atakaye hitaji.

Hii distro ni ISO image unaweza ku burn kwenye DVD ya kawaida ya 4.7gb.

.........................................................Bado moja ya mwisho MAVERICK OSX 10.9.........................
 
Ngoja nitulie maana ile iATKOS S3 nshaipakua lkn nimebanwa
lkn Ntaweza fanya Dual Booting ya hii kitu?
 
Kaka mkubwa umetoa somo zuri na hii kitu nilitamani sana kiwe kwa pc ya mi nina laptop dell latitude e6400 na hizo
osx zote nimedownloa lakini nashindwa kufanya intallation kwamaana ya boot ninafanya je?
 
Chink said:
Kaka mkubwa umetoa somo zuri na hii kitu nilitamani sana kiwe kwa pc ya mi nina laptop dell latitude e6400 na hizo
osx zote nimedownloa lakini nashindwa kufanya intallation kwamaana ya boot ninafanya je?
Click to expand...

Embu jaribu kufuatilia hizi instructions ila hakikisha unatafuta ideneb 1.5 au 1.6 hizo ni distro za osx

Restart your computer and hold down the F2 key to enter BIOS settings.
Change your BIOS settings to comply with Apple standards.
SYSTEM CONFIGURATION:

  • INTEGRATED NIC: DISABLED
  • PARALLEL PORT: DISABLED
  • SERIAL PORT: DISABLED
  • SATA OPERATION: AHCI
  • MISCELLANEOUS DEVICES:
    • ENABLE INTERNAL MODEM
    • ENABLE MODULE BAY
    • ENABLE MEDIA CARD, PC CARD, AND 1394
    • ENABLE EXTERNAL USB PORT
    • ENABLE MICROPHONE
    • ENABLE eSATA
  • DISABLE ADAPTOR WARNINGS UNLESS YOU REALLY ENJOY THAT ANNOYING BEEP DURING START-UP
Make sure all of your settings are working appropriately
Restart your computer holding the F12 key and boot from CD.
When prompted, hit the F8 key to enter startup options and type in any flags that you would like to see… I like to have verbose mode [-v] on so I can see what’s going on… especially if I have to go back and remedy a setting.
The length of time the next step takes generally depends on your system configuration and how much RAM you have. The more RAM the better
Install Welcome Screen (This is where things get just a bit tricky)

FORMAT YOUR HARD DRIVE


  • Click on Utilities at the top of the screen in the menu bar
  • Go to Disk Utilities
  • Choose the main hard drive
  • Click the Erase tab
  • Click on the volume format drop down menu and choose OS Extended Journaled
  • Name the partition whatever you like – be creative with it and have some fun… why else would we be putting Mac OS on a PC? =P
  • DON’T FORGET to click on the options button and chose GUID Partition then go for it
Once partitioned, exit out by clicking the red X button and it should take you back to installation screen
Choose “Continue” and you will be shown the Agreement page, click Agree.

You will be shown the available options for drives to install on, you should see the one you just partitioned.


  • If you don’t see one, it’s ok, you can go back to the Disk Utility and reconfigure
After you click continue and go to the Summary page WAIT!!!You MUST CUSTOMIZE!!

  • If you don’t, the install will not function properly
Click on the Customize button and make the choices you require based on your specific hardware.
If the first install doesn’t work, you probably need to go back and modify the customization options;
OR
If you have different hardware, you might need to take another look at your BIOS settings.

Click Done and then Install

Voila!! The installer will primarily check your disk, you can skip the process but I recommend you let it do its thing. Once inspected, the disk won’t need to be inspected again for additional installs.
Once you see a screen with a green checkmark, you did it!!


OS X has been installed on your computer.
You’ll see a fancy video saying welcome in several languages and then be prompted to set up the basics.

Follow all the prompts



 
MSAADA TAFADHALI mimi inaishia kwenye select destination na aionyeshi kitu chochote nifanye nini?
 
Mwl.RCT said:

​Je umetumia tool ipi? .Hii ni version gani?,Da! OSX inavutia kwa kweli h120
Click to expand...

Hii ni Lion 10.7.2 nimetumia distro ya IATKOS L2 ila ukitaka kurahisisha mambo download distro za niresh zenyewe una burn kwenye DVD ya kawaida then unaweza endelea na installation ila kuna settings chache kwenye bios za kubadilisha inategemea na aina ya mashine. ukitaka urahisi zaidi google model ya laptop au desktop yako ukimalizia na neno hackintosh eg. "HP 650 hackintosh" utaweza pata settings na procedures kwa waliofanikiwa ku install na vesrions walizotumia.
 
Wakuu ninaweza ku-install hii OS?? Machine yangu ni Dell Optiplex 745. 1.80 GHz Processor, 2GB RAM
 
You must log in or register to reply here.

Similar Discussions

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…