African Satellite World and Sat Gear

[wayachi]

hi members.....am looking for firmware to patch astrovox vsr 9155 hd which support patch menu for biss keys....

My brother think of how you can acquire a new box, the one you have is never supported software wise. Go for these much talked boxes. At the moment there are just a few boxes supporting Pv apart from SRT; Openbox x5, A6pro,Azbox Sdual,Alphabox,Aone HD are known to have been modified and work very well with PV

 

[drandonzero]

hi members.....am looking for firmware to patch astrovox vsr 9155 hd which support patch menu for biss keys....

www.netkeysat.net/cat.php?id=192

 

[Kibet]

My brother think of how you can acquire a new box, the one you have is never supported software wise. Go for these much talked boxes. At the moment there are just a few boxes supporting Pv apart from SRT; Openbox x5, A6pro,Azbox Sdual,Alphabox,Aone HD are known to have been modified and work very well with PV

wayachi where can one get all those boxes you have mentioned.

 

[Kibet]

dear muzombozi, kindly give me that softcam even its for europian channels and it will help me lot!
thanks and regards

Go to http://www.freesat.cn/faq.asp?faq=10 you will get all the support you need for now. As for the Asian PV support, its still in the process. Hope so..I understand they release upgrades every month. Ya August bado, am crossing my fingers.

 

[georgekamal]

my god, why the members not giving me the softcam keys for openbox V8 combo ? :thinking: :A S confused:

 

[wayachi]

wayachi where can one get all those boxes you have mentioned.

These are Chinese boxes mostly found in Chinese markets and some local markets are also available. When you bump into one of these get it you will like what it does.

 

[wayachi]

my god, why the members not giving me the softcam keys for openbox V8 combo ? :thinking: :A S confused:

It means there are few members using your kind of box, you should have gone to the link provided and read about the box; Alternatively follow this link; freesat service

 

[georgekamal]

It means there are few members using your kind of box, you should have gone to the link provided and read about the box; Alternatively follow this link; freesat service

thank u , thank u very much for the reply, but unfortunately i didn't found any valuable softcam keys with PVU keys for this box in any where !

 

[Mavella]

Ungo ni mdogo tumia ungo wa ft8 utazipata muda wote.

I use 6ft with supermax lnb signal is very statable all time

 

[kungu1]

Yes sir. Tried that option earlier and it was actualy writing data to the flash

Verify the following details on your receiver.

[h=2]Front Panel[/h]

[h=2]Front Panel of FAKE units has no:
– plastic film protection
– USB Icon & Information engraving
The «Stand-By» LED light remains red when the units is switched ON


Bottom Chassis[/h]

[h=2]Bottom Chassis of FAKE units:[/h]– has fewer ventilation slots, causing inevitable overheating of the electronic components
– has a plastic protection film on which is pasted the Serial Number and the four rubber pads

[h=2]– carries no Warranty Seal[/h]
[h=2]Fake Remote Control Unit[/h]

Remote Control Handset of FAKE units has no STRONG information printed on its back.

 

[mankuri]

main apstar 7, below is20 View attachment 277142

Just what the doctor ordered 🙂

 

[sirmeus]

Verify the following details on your receiver.

[h=2]Front Panel[/h]

[h=2]Front Panel of FAKE units has no:
– plastic film protection
– USB Icon & Information engraving
The «Stand-By» LED light remains red when the units is switched ON


Bottom Chassis[/h]

[h=2]Bottom Chassis of FAKE units:[/h]– has fewer ventilation slots, causing inevitable overheating of the electronic components
– has a plastic protection film on which is pasted the Serial Number and the four rubber pads

[h=2]– carries no Warranty Seal[/h]
[h=2]Fake Remote Control Unit[/h]

Remote Control Handset of FAKE units has no STRONG information printed on its back.

Thank you sir. Confirmed to be a fake

 

[dejumbo]

thank u , thank u very much for the reply, but unfortunately i didn't found any valuable softcam keys with PVU keys for this box in any where !

You can try Netkeysat.net and download softcam keys (e.g. SoftCam by eniz9 New Keys Fix 26-05-15.rar).
Read the description for the relevant keys you wish to load in your receiver.

 

[langas]

ASAS mates, is it possible to download this topic in its entirety from page 1 to 774 for offline use? like to a single pdf file? Is there a tool that can do that? 

 

[Gich]

could anyone with 130 cm offset , send a photo of your setup. thanks

Where do you want to train the 130cm? Different people have theirs directed to different directions. I have one that faces 7w

 

[thr3eee]

Where do you want to train the 130cm? Different people have theirs directed to different directions. I have one that faces 7w

photo please.

 

[Gich]

photo please.

Here you go. 130cm on 7w

 

[kungu1]

Countdown launch of V225 rocket underway carrying Eutelsat 8 West B and Intelsat 34.
Live coverage on ARIANESPACE.TV

 

[holycow]

Countdown launch of V225 rocket underway carrying Eutelsat 8 West B and Intelsat 34.
Live coverage on ARIANESPACE.TV

Taken my front seat.

 

[Kiruri]

Help needed.
I have tried to set up my 6ft with the supermax lnb and 4950H here in Kikuyu to catch Apstar but failed miserably. The signal quality flactuates between 78% and 85% but the picture cracks alot. Any advice would be welcome.