freq
JF-Expert Member
- Sep 11, 2017
- 1,858
- 1,407
The actuator is 18inch or 45cm stroke length which happens to be equal to the total stroke length of elevation mount of my 8ftWhat's the length of actuator and pliz if you can post the lnb set up
LNB set up is multi lnb (5lnbs; 3 C band and 2 ku band) on the 8ft.
On the picture, when the dish is set to point at 68.5, the primary lnb is 68.5, the upper cband parasite is 76.5, the lower cband is 64.2 and the lower ku is 57e.
The upper ku lnb does not nab anything at that point, but the dish can be moved to let it nab from 52.5 ku, 55e ku 57e ku, 68.5 ku, 70.5 ku 75e ku.
The cband primary lnb when the dish is moved, can nab anything between 52e to 91.5 measat that does not require dielectric plate. Eg belintersat, 64.2C, 66C, 68.5C, 72C, 75C ,76.5C, 78C, 91.5C
The lowest cband lnb has dielectric plate when the dish is moved it can nab sats along the 51.5 to 91.5 arc that do require dielectric so far I've been successful in nabbing 57.e C using it. Not successful on 62e C
The multi lnb set up also avoids unnecessary long movements that contribute to ware and tare. Eg instead of moving the primary lnb all the way from 68.5 to 78.5, just move it a little so that the highest parasite lnb at 76.5 moves just an inch to 78.5
Or instead of moving dish from 68.5 to 76.5, just switch to parasite lnb at 76.5 without any movement. Also saves waiting time while switches between channels on different sats
