African Satellite World and Sat Gear

African Satellite World and Sat Gear

its as easy as ABC, all you need is tons of patience and kaboom, 6 in 1

10408768_671521009552399_453922837305550320_n.jpg
 
mindset learn.jpg

Mindset Learn, Mindset health on new TP on Intelsat 68.5 E. Confirmed by blindscan this morning while having my breakfast. ASAS is a terrible disease the addiction to the remote, blindscans and lyngsat or flysat is terrible.
 
check page 74 if iam not wrong dated 15th june 2014


PROCUDURE FOR RESURRECTING STRONG 4922 DECODER
1).Load the software into an empty flash disk.
2).Insert the flashdisk in the decoder while the decoder is switched OFF.
3).Switch ON the decoder using the power rear switch.
4).Keep on pressing channel up button in front of the decoder until a blue menu appears on the screen.
5).The blue menu will have four options namely;
i) Usb download (auto select)
ii)Usb download(browse)
iii)Factory reset
iv)Quit
6).Use the channel up/down button to select usb download(auto select) option & the press the front power button to select.
7).The file will start uploading, wait until it finishes & the decoder will reboot.
8).Congratulations, strong 4922 decoder back to life!!.
 
These decoders are there, its just that they are MPEG 2/ dvbs instead of what we are used to, you know HD, PVR Mpeg 4 with internet connectivity; Smart decoders😉. Drop in at digital life and make them sell it to you at Ksh1500 and below, do not tolerate anything above 2K

dital life are selling it at 3200,riwara at 3200 space at 3000 and astrovox 290 which msondaa says works the same the lowest i got was 2500 imagine from a shop i will get the name later
 
PLIZ someone direct me to page where the PROCESS OF REVIVING FRIED SRT 4922 is explained

I saw this on facebook,and I feel I should share.....Facebook newsfeed post by: Yusuf Mohamed
------------------------
Yusuf Mohamed wrote:

Hallo Pals, incase your strong 4922 is fried/bricked while in the process of updating software due to power failure,then one should not worry. The procedure is simple and straight forward. I happened to fry mine yesterday but i was able to bring it back to life. So i have decided to share it with you guys.

PROCUDURE FOR RESURRECTING STRONG 4922 DECODER
1).Load the software into an empty flash disk.
2).Insert the flashdisk in the decoder while the decoder is switched OFF.
3).Switch ON the decoder using the power rear switch.
4).Keep on pressing channel up button in front of the decoder until a blue menu appears on the screen.
5).The blue menu will have four options namely;
i) Usb download (auto select)
ii)Usb download(browse)
iii)Factory reset
iv)Quit
6).Use the channel up/down button to select usb download(auto select) option & the press the front power button to select.
7).The file will start uploading, wait until it finishes & the decoder will reboot.
8).Congratulations, strong 4922 decoder back to life!!.
 
dital
life are selling it
at 3200,riwara at 3200 space at 3000 and astrovox 290 which msondaa says
works the same the lowest i got was 2500 imagine from a shop i will
get the name later



Maybe those guys read this thread and know what exactly is trending,
very sad. That decoder should not sell for more than 2K seriously, you
cannot upgrade the s/w and if you manage to get the Rs232 cable, it will
be another uphill task. Maybe they thought you are a newbie

On the otherhand the technosat has the best user interface ever with clear graphics and its very easy of use, even to non techsavvy guys.
 
I saw this on facebook,and I feel I should share.....Facebook newsfeed post by: Yusuf Mohamed
------------------------
Yusuf Mohamed wrote:

Hallo Pals, incase your strong 4922 is fried/bricked while in the process of updating software due to power failure,then one should not worry. The procedure is simple and straight forward. I happened to fry mine yesterday but i was able to bring it back to life. So i have decided to share it with you guys.

PROCUDURE FOR RESURRECTING STRONG 4922 DECODER
1).Load the software into an empty flash disk.
2).Insert the flashdisk in the decoder while the decoder is switched OFF.
3).Switch ON the decoder using the power rear switch.
4).Keep on pressing channel up button in front of the decoder until a blue menu appears on the screen.
5).The blue menu will have four options namely;
i) Usb download (auto select)
ii)Usb download(browse)
iii)Factory reset
iv)Quit
6).Use the channel up/down button to select usb download(auto select) option & the press the front power button to select.
7).The file will start uploading, wait until it finishes & the decoder will reboot.
8).Congratulations, strong 4922 decoder back to life!!.

Yap.Am the one.
 
Maybe those guys read this thread and know what exactly is trending,
very sad. That decoder should not sell for more than 2K seriously, you
cannot upgrade the s/w and if you manage to get the Rs232 cable, it will
be another uphill task. Maybe they thought you are a newbie

On the otherhand the technosat has the best user interface ever with clear graphics and its very easy of use, even to non techsavvy guys.

so you would recommend technosat over astrovox in short
 
Just finished watching the Brazil vs Chile match on TRT SPORT dig****k package and I can say with confidence the picture quality is outstanding. Even though the audio is in Turkish it didn't matter at all. What a match.
 
kindly assist where to get it at a price less than 3k at btw 2k and 25 hivi

Its been sometime since I asked for the technosat T-888 decoder. Anyway Ill see what I can do, lets hope you get a solution from bat
 
Last edited by a moderator:
Its been sometime since I asked for the technosat T-888 decoder. Anyway Ill see what I can do, lets hope you get a solution from bat

thanks tecdee i will appreciate alot meanwhile i will talk to mr bat and see how it will work out
 
Last edited by a moderator:
Back
Top Bottom