African Satellite World and Sat Gear

African Satellite World and Sat Gear

Yes mbcees are still there but at 8w not 7w. Minus max which moved a few yrs back to 26e if am not wrong.
 
...
kamathig, I tried combining 70.5e and 68.5e on a single lnb, getting all ktn channels and oops to Bamba package and strong freq. from 68.5e; then had that idea of two lnb combination in one dish.
...
I tried it, and failed. It's about 1cm skew work btn the two sat. So, I'm thinking of either quit ifilmers for Bambas or possibility of using two LNBs
 
I tried it, and failed. It's about 1cm skew work btn the two sat. So, I'm thinking of either quit ifilmers for Bambas or possibility of using two LNBs

You need a larger dish especially if you're after a specific tp. You cannot get all frequencies stable on both sats. With a 90cm lots of compromise is required.
 
Maybe I should try to increase the signal quality from 68 to a value higher. If you are on the bird what is your signal quality. Am using v7 combo.
mine receiver is tiger t 245+pro hd and the signal is 68% and it’s working perfectly,
 
Maybe I should try to increase the signal quality from 68 to a value higher. If you are on the bird what is your signal quality. Am using v7 combo.
poit of correction that freq we are discussing about is meant for west Africa beam.so if u are around that point u are lucky to have it but if are in east Africa go for 8w
 
Maybe I should try to increase the signal quality from 68 to a value higher. If you are on the bird what is your signal quality. Am using v7 combo.
Hello friend, MBcees are on 7w 11938V27500 and 8w 11471v27500 which you can get easily on 6ft. 11559V27500 hosts different channels on 8w . The same tp hosts MBCEES on 7w North Africa beam which we can't get here unless with a VBBUD. Happy hunting.
Only one person i know who is using a 25ft who is getting MBcees North Africa

Sent using Jamii Forums mobile app
 
I tried it, and failed. It's about 1cm skew work btn the two sat. So, I'm thinking of either quit ifilmers for Bambas or possibility of using two LNBs

Or if you're a gospel guy you go with the Iranian for if your area receives terrestrial signals, most of the Bam ba package is receivable with a terrestrial decoder.
 
Is

Is this motor suitable for only mesh dish? Am curious about this.
Generally you'd need a heavy duty motor and a high voltage power supply for a heavy dish.

Solid dishes are much heavier and more susceptible to wind

The size and rating of your motor depends on the weight of your dish and how how far you want to move it.
 
I lost Dixc over the weekend. Are they still on and receivable on 6ft?
Still on and receivable on 6ft, frequency at the same usual quality percentage.
IMG_20180820_175322.jpg
 
An On-Off-On Double pole toggle switch. Can be used to put on/off and reverse polarity of power supply to a DC motor thus creating a change in direction of movement.

Available at a local store.

IMG_20180821_214003.jpg
 
Back
Top Bottom