African Satellite World and Sat Gear

African Satellite World and Sat Gear

The price to pay ... Sacrifice any other SATs below 68 e , the likes of Avatar,Thaicom , The signal is very weak.At six ft it must be a clear view.
 
Elevation angle below 51° (68.5e) - 76.5 e = 42 °, 78.5 e= 41 ° , Above 68.5 e ( 51° ) - 57 e = 64 °, yamal = 66.5 ° LNB positions 68.5 e as focal point.
 
Elevation angle below 51° (68.5e) - 76.5 e = 42 °, 78.5 e= 41 ° , Above 68.5 e ( 51° ) - 57 e = 64 °, yamal = 66.5 ° LNB positions 68.5 e as focal point.
So you are saying, if you wanted to add Apxtr 76.5e on that set up you would put the lnb below (on the lower side of) your existing primary 68.5e ?
 
So you are saying, if you wanted to add Apxtr 76.5e on that set up you would put the lnb below (on the lower side of) your existing primary 68.5e ?
Above,elevation angles below primary LNB as # 68.5 at 51 ° like Apstar at 42° the LNB should be at the top,In one of the Pics you can see two parasites KU lnb's * immediate after the primary C band is 57e at elevation 51°,Next is Yamal at 66.5 °
 
Above,elevation angles below primary LNB as # 68.5 at 51 ° like Apstar at 42° the LNB should be at the top,In one of the Pics you can see two parasites KU lnb's * immediate after the primary C band is 57e at elevation 51°,Next is Yamal at 66.5 °

+ 51° and - 51° @ the pic ,57 e at 64 °
1522155952535.jpg
and Yamal @ 66.5,
 
safcom introduces 4g unlimited for 3 hrs at KES 100. now we can stream iptv. Or not yet.
 
Kindly send me a screen snapshot of the rear panel & a dump back-up "All Flash file" of the current software in the satellite receiver so as to access the STB Hardware ID specifications.

@drandonzero, the hardware components' screen snapshot of the rear panel in the DiGiSat DCL9800 HD did not match that of Tiger HD satellite receivers; this implies that the main-boards are totally different. At this stage it is also difficult to access the rs232 UART Loader compatible with the STB.

The only alternative is to conduct a search based on DiGiSat DCL9800 HD main-board chassis number. Kindly send a screen snapshot of the main-board revealing clearly the chassis number.


The "db.bin" file is 81.6KB and it is not an "All Flash file" . Press Menu key on the RCU >>>Tools >>USB Back-Up.
 
Back
Top Bottom