guts
Member
- Aug 22, 2016
- 11
- 1
What we want is software update for powerful, if novatek has stopped producing CPUs (Hardware), that is their problem, after all if my CPU gets roasted, I don't replace, I buy a new STB (classic ASAS Symptoms). Viva FTA.4922 box using Novatek CPU, but this company not offer support of sat business again, so autoroll function need more time or can't add forever, Novatek Company is very bad business on sat box. nothing more company use this CPU again.
4922 box using Novatek CPU, but this company not offer support of sat business again, so autoroll function need more time or can't add forever, Novatek Company is very bad business on sat box. nothing more company use this CPU again.
also some sat finders use the chip and its hard to work with ie software update can easily brick it.Its not tough on 8ft bro' just make sure you get a visual aid close by, and lots of patience. 6ft is also doable, but makes you sweatneed help adding nss 12 to this setup(Image 1). Primary is Ap7 and the parasite is IS20, tried IS as the primary but nss12 does not work(image 2).
- dish 8 feet
- LNB ES 21 plus
- Dec Freesat v7 combo

need help adding nss 12 to this setup(Image 1). Primary is Ap7 and the parasite is IS20, tried IS as the primary but nss12 does not work(image 2).
- dish 8 feet
- LNB ES 21 plus
- Dec Freesat v7 combo
Duhok TV Middle East (Ku band) footprint map.intrested in duhok tv on 57 east cn i nab it on a 90cm dish in nairobi
Hey Gich, that is creative work. I will try out that setup very soon.I successfully managed to combine 3 disecq switches, i.e. two 4x1 switches to an 8x1 switch. The two 4x1 switches carry 8 birds scattered in 3 dishes. I then connected the two switches to two ports of the 8x1 switch, which ideally should be connected to the receiver.
Instead of connecting directly to the receiver, I split the signal using a 1x2 signal splitter and connected the split signals to a 4950H and a V7 combo. The results were impressive. No loss of even 1% of the signal. Here is a pdf document I created of the connection. Viva FTA
Thanks will try over the weekend.View attachment 423685there you go 57,68,76 from bottom
& 11997 H 27500 DVB-S2 Movies!ses 5 11938/27500H free to air channels on starts#t
traceafr*ca
msc
I successfully managed to combine 3 disecq switches, i.e. two 4x1 switches to an 8x1 switch. The two 4x1 switches carry 8 birds scattered in 3 dishes. I then connected the two switches to two ports of the 8x1 switch, which ideally should be connected to the receiver.
Instead of connecting directly to the receiver, I split the signal using a 1x2 signal splitter and connected the split signals to a 4950H and a V7 combo. The results were impressive. No loss of even 1% of the signal. Here is a pdf document I created of the connection. Viva FTA
me too +255713026495+25472054646add me to whatsapp group
does that mean its to fringe to nab here in nairobi or even kenyaDuhok TV Middle East (Ku band) footprint map.
View attachment 423773
NSS 12 at 57.0°E - LyngSat Maps
Yes I do. Each of the two decoders will have a signal feed of the 7/8 birds that I am able to nab, so I could be on Apl on IS20 on one, while the little ones will be on DC on Ap7. Is this what you mean?Do you get different channels on each decoder?
Has been for a while now.ses 5 11938/27500H free to air channels on starts#t
traceafr*ca
msc
On a further inquiry msanii Gich instead of using a dual splitter can I use 8 way splitter and split the signal to eight different decoders.Yes I do. Each of the two decoders will have a signal feed of the 7/8 birds that I am able to nab, so I could be on Apl on IS20 on one, while the little ones will be on DC on Ap7. Is this what you mean?
Yes I do. Each of the two decoders will have a signal feed of the 7/8 birds that I am able to nab, so I could be on Apl on IS20 on one, while the little ones will be on DC on Ap7. Is this what you mean?[/QUOTE
We this kind of setup, is it necessary to buy/use dual/quad ku lnbf?