African Satellite World and Sat Gear

African Satellite World and Sat Gear

mah-mah123 said:
No picture just sound on s**y kiks on strong 4922, other frequency are OK.

Otherwise thumbs-up team
Click to expand...


Hi there mah-mah123,

During your troubleshooting steps have you tried to perform a reset of your receiver?
If not it might be worth trying, here's how:

Reverting to the factory default settings
You can clear all memorized settings and restore the receiver to the factory default settings by the following procedure. This procedure can also be used to initialize the receiver before you use it for the first time. Be sure to use the buttons on the receiver to perform this operation.

1. Turn off the receiver.

2. Hold down (on/standby) on the receiver for 5 seconds. [CLEARING] appears on the display panel for a while, then changes to [CLEARED!] .

Note
It takes a few minutes for the memory to be cleared completely. Do not turn the receiver off until [CLEARED!] appears on the display panel.
Please let me know if this fixes your problem.
 
nosignal said:
Hi there mah-mah123,

During your troubleshooting steps have you tried to perform a reset of your receiver?
If not it might be worth trying, here's how:

Reverting to the factory default settings
You can clear all memorized settings and restore the receiver to the factory default settings by the following procedure. This procedure can also be used to initialize the receiver before you use it for the first time. Be sure to use the buttons on the receiver to perform this operation.

1. Turn off the receiver.

2. Hold down (on/standby) on the receiver for 5 seconds. [CLEARING] appears on the display panel for a while, then changes to [CLEARED!] .

Note
It takes a few minutes for the memory to be cleared completely. Do not turn the receiver off until [CLEARED!] appears on the display panel.
Please let me know if this fixes your problem.
Click to expand...
Man man u ain't alone. Not working for snys
 
nosignal said:
Hi there mah-mah123,

During your troubleshooting steps have you tried to perform a reset of your receiver?
If not it might be worth trying, here's how:

Reverting to the factory default settings
You can clear all memorized settings and restore the receiver to the factory default settings by the following procedure. This procedure can also be used to initialize the receiver before you use it for the first time. Be sure to use the buttons on the receiver to perform this operation.

1. Turn off the receiver.

2. Hold down (on/standby) on the receiver for 5 seconds. [CLEARING] appears on the display panel for a while, then changes to [CLEARED!] .

Note
It takes a few minutes for the memory to be cleared completely. Do not turn the receiver off until [CLEARED!] appears on the display panel.
Please let me know if this fixes your problem.
Click to expand...

Problem not fixed. Also tried to delete key and frequently, and rescinded with no success
 
For those who have a spot for Gospel music, St*r Religion channel open on the Co****tal package on E70B
 
Gee Em Eh pkg on apztar not showing with the stated keys . same with Tel.. Enov ella. Anyone else experiencing this? Any fix to this?
 
An member who can get or has Positioner and an actuator for a 240cm mesh p.f to kindly pm
 
Hello members, is this scalar ring for PV channels only?yesterday I test it but no any channels pop up a part from PV channels
 
You must log in or register to reply here.

Similar Discussions

Our Community

Coming Soon

Regional Communities

Coming Soon
Back
Top Bottom
Menu
Forums
New posts
Log in
Register