Wababe wa computer language kwenye vifaa vya kielectronics

Wababe wa computer language kwenye vifaa vya kielectronics

MWIJA 08

Member
Joined
Jun 29, 2022
Posts
44
Reaction score
59
Habarini za majukumu wakubwa bila kupoteza muda naomba kufahamishwa jambo hili:-

Ninaweza kujifunza ( kufundishwa na mtu) kupiga codi za electronics device bila kwenda chuo?

Nina elimu ya kidato cha nne lakini napenda saana kubuuni mifumo mbali mbali ya kielectronics ,
Lakini tatizo kubwa ni kwamba, ishu yoyote inayohusiana na digital inanisumbua saana.

Naambatanisha picha apa chini kwa ufafanuzi zaidi wa ninachokimaanisha.
Asanten.... kwenu wakuu.
Screenshot_20221121-222746.jpg
 
Unaweza kujifunza pia mwenyewe, lakini hakuna short cut
Ingia hii website, tengeneza account, ili kila ukimaliza unapewa cheti...ni bure hamna malipo....
Jifunze kwanza
Electronics....



Halafu ndio uende kwenye.....

Computer systems




Baada ya kuelewa mambo ya electronics na computing.....sasa ndio uende ukajifunze coding.....
hapa pia ni bure, ni kufungua account tu...

 
Unaweza kujifunza pia mwenyewe, lakini hakuna short cut
Ingia hii website, tengeneza account, ili kila ukimaliza unapewa cheti...ni bure hamna malipo....
Jifunze kwanza
Electronics....



Halafu ndio uende kwenye.....

Computer systems




Baada ya kuelewa mambo ya electronics na computing.....sasa ndio uende ukajifunze coding.....
hapa pia ni bure, ni kufungua account tu...

Nashukuru saana ndugu Teknocrat
 
Unaweza kujifunza pia mwenyewe, lakini hakuna short cut
Ingia hii website, tengeneza account, ili kila ukimaliza unapewa cheti...ni bure hamna malipo....
Jifunze kwanza
Electronics....



Halafu ndio uende kwenye.....

Computer systems




Baada ya kuelewa mambo ya electronics na computing.....sasa ndio uende ukajifunze coding.....
hapa pia ni bure, ni kufungua account tu...


Unaweza ukatu guide mfano course zipi na zip za kusoma mfano mtu anayependa kutengeneza auto systems mfano integrated sensors.
Kipi cha kusoma kwenye open source
na kwenye computer systems.
 
Unaweza ukatu guide mfano course zipi na zip za kusoma mfano mtu anayependa kutengeneza auto systems mfano integrated sensors.
Kipi cha kusoma kwenye open source
na kwenye computer systems.
Utaalamu wa mambo ya kutengeneza auto system kama Integrated sensors, siku hizi yamerahisishwa kwa ujio wa vitu kama Arduino na Rasberry Pi
Hivi vifaa vimewezeshwa na ni rahisi kujifunza kuweza kutengeza auto system zinazotumia lugha ya kompyuta, na haihitaji ujuzi mahiri wa somo la electronics.
Lakini si vibaya ukajaribu kujifunza pia basic electronics uliujue sensors na vifaa ya electronis(components) vinavyofanya kazi

Kutumia Arduino inahitaji kujifunza lugha ya kompyuta inayoitwa C++ au C,
Arduino ni open-source electronics platform ambayo ni level nzuri ya kwanza kwa mwenye kuanza kutaka kujifunza mambo hardware and software.
Arduino hujulikana kama microcontroller, uzuri wake ina kuwa na CPU, Memory na Input and Output I/O na ambayo inakuwa haina mlolongo mrefu wa maelezo ya kutumika kuendesha auto system.


Huu hapa chini ni mfano wa aina moja ya hizi Arduino board, kuna mibadala mingi iliyotengenezwa kwa mfumo kama wa Arduino na yenye bei nafuu kama Elegoo board
1670191687699.png



Kutumia Rasberry Pi unatakiwa kujua Python ambayo ni lugha inayotumika kuiprogramme,
Kuna mibadala ya Rasberry Pi, kama
Hii hujulikana kama Microprocessor, yaani inatumia mlolongo mrefu wa maelezo ya kompyuta ili kufanya kazi..
Hizi kidogo ni ghali, lakini kuna mibadala yake kama BBC Micro bit..



1670191561747.png
 
Angalia mfano kama huu chini, jinsi Arduino inavyotumika na sensors


Ping Ultrasonic Range Finder​



The SEN136B5B is an ultrasonic range finder from Seeedstudio. It detects the distance of the closest object in front of the sensor (from 3 cm up to 400 cm). It works by sending out a burst of ultrasound and listening for the echo when it bounces off of an object. It pings the obstacles with ultrasound. The Arduino board sends a short pulse to trigger the detection, then listens for a pulse on the same pin using the pulseIn() function. The duration of this second pulse is equal to the time taken by the ultrasound to travel to the object and back to the sensor. Using the speed of sound, this time can be converted to distance.

Hardware Required​

Circuit​

The 5V pin of the SEN136B5B is connected to the 5V pin on the board, the GND pin is connected to the GND pin, and the SIG (signal) pin is connected to digital pin 7 on the board.

1670194241455.png


Schematic​

1670194291102.png

Code​

1670194658233.png
 
MWIJA 08
Huyu mtu katika hii picha, ni dereva
Anaindesha hiyo Bulldozer remotely, yaani yeye yuko ofisini au hata nyumbani kwake na bulldozer imetengenezewa vifaa vinavyowezesha kuimiliki kiuendeshaji kwa kutumia mfumo wa compyuta ukiambata na camera kadhaa....

1670195217805.png
 
Angalia mfano kama huu chini, jinsi Arduino inavyotumika na sensors


Ping Ultrasonic Range Finder​



The SEN136B5B is an ultrasonic range finder from Seeedstudio. It detects the distance of the closest object in front of the sensor (from 3 cm up to 400 cm). It works by sending out a burst of ultrasound and listening for the echo when it bounces off of an object. It pings the obstacles with ultrasound. The Arduino board sends a short pulse to trigger the detection, then listens for a pulse on the same pin using the pulseIn() function. The duration of this second pulse is equal to the time taken by the ultrasound to travel to the object and back to the sensor. Using the speed of sound, this time can be converted to distance.

Hardware Required​

Circuit​

The 5V pin of the SEN136B5B is connected to the 5V pin on the board, the GND pin is connected to the GND pin, and the SIG (signal) pin is connected to digital pin 7 on the board.

View attachment 2436126

Schematic​

View attachment 2436127

Code​

View attachment 2436128
Kaka "Teknocrat" umetisha tunashukuru saana kwa madini.

Sent from my SM-J410F using JamiiForums mobile app
 
Back
Top Bottom