Tatizo la write protected kwenye flash disk naomba msaada

[jov]

Kila nikiingiza tu flash yangu kwenye computer naandikiwa "you neeed to format the disk in drive F before use it. Do you want to format." nikikubali inaleta tena message " the disk is write protected.

NAOMBENI kusaidiwa jinsi ya kufix tatizo.

 

[egentle]

kila nikiingiza tu flash yangu kwenye computer naandikiwa "you neeed to format the disk in drive F before use it.do you want to format." nikikubali ilaleta tena message " the disk is write protected
NAOMBENI kisaidiwa jinsi ya kufix tarizo

NilIwahi kuondoa write protection kwenye Flash disk yangu, kwa kuondoa system files za hiyo flash na kuweka zingine, ilikuwa online nilitumia page ya jetflash....after that flash ikawa inasoma kama ni ya kampuni ya Jetflash

 

[jov]

NilIwahi kuondoa write protection kwenye Flash disk yangu, kwa kuondoa system files za hiyo flash na kuweka zingine, ilikuwa online nilitumia page ya jetflash....after that flash ikawa inasoma kama ni ya kampuni ya Jetflash

so hadi niwe online ndo naweza kuiweka sawa kwa kuingia kwenye hiyo page?

 

[egentle]

so hadi niwe online ndo naweza kuiweka sawa kwa kuingia kwenye hiyo page?

Wait niichek kama nawez kupa direct link

 

[jov]

Wait niichek kama nawez kupa direct link

haya ahsante

 

[egentle]

haya ahsante

Jaribuuu kufanya hiii recovey

http://agnipulse.com/2010/04/jetflash-online-recovery-repair-your-transcend-usb-drives-for-free/

Fuata maelekezo hayo ya recovery. nilifanikiwa kurekebisha flash zaid ya tatu.

 

[jov]

Jaribuuu kufanya hiii recovey

JetFlash Online Recovery - Repair your Transcend USB Drives for free - AgniPulse

Fuata maelekezo hayo ya recovery. nilifanikiwa kurekebisha flash zaid ya tatu.

poa ndugu naona umeme umekata hapa ntaingia na ntarudisha feedback badae

 

[Herbalist Dr MziziMkavu]

poa ndugu naona umeme umekata hapa ntaingia na ntarudisha feedback badae

Mkuu unaweza pia kutumia hii njia hapa chini
Click start
then run regedit
go to this directory HKEY_LOCAL_MACHINE\SYSTEM\Currentcontrolset\control\
if you can't find StorageDevicePolicies under control folder
then make some new one. Follow this steps:

step 1:
go to this directory HKEY_LOCAL_MACHINE\SYSTEM\Currentcontrolset\control\
again and right click control folder

step 2:
select new, then click key and rename the new key #1 folder into
StorageDevicePolicies

step 3:
right click StorageDevicePolicies folder and select new DWORD(32-bit) Value
for 32-bit Operating System and select new DWORD(64-bit) Value
for 64-bit Operating System

step 4:
rename dword newer folder into WriteProtect, then double click WriteProtect
and change the value data into 0 with hexadecimal base, Then close regedit

step 5:
open my computer and refresh it 5 times without do anything to your usb, and
properly eject your flash drive

step 6:
plug in your usb again into your computer and format it using exfat instead of fat32


Now, you can use your flash drive again....

Au njia hii hapa chini...

start - run -regedit - HKEY_LOCAL_MACHINE\SYSTEM\Currentcontrolset\control\storatedevicepolicies


in right side you will be getting writeprotect option, just right click that and modify the value from 1 to 0.
Exit Registry

Restart your Computer and re-connect your USB pen drive on your computer.

Au njia hii hapa

1. open command prompt (cmd.exe)
2. type "diskpart"
3. type "list disk"
4. identify which one is your USB disk.

5. type "SELECT DISK n", where n is the number of your USB disk.
*** BE CAREFUL AT THIS PART. Selecting the wrong disk might delete your hard drives ****

6. type "clean", (you may need to repeat twice or thrice). If it doesn't work, don't proceed with the next instruction :-(
7. type "create partition primary"
8. type "select partition"
9. type "active"
10. type "format fs=ntfs"

Au njia ya mwisho hii hapa.

Try this:

For USB drives:

1. Open Start -> Run...
2. type diskmgmt.msc and press enter
3. right click on the partitin you want to format (where the leter and size is)
4. select 'Delete Partition...' and confirm
5. right mose button in the same place and select 'Create partition'
6. select primary partition
6. select size, file forma, disk leter, label etc should be all right if you leave defaults.
7. click ok

This will recreat the partition and format it in proper way. Helped me and will help to most of you if you have problem with MBR.

 

[best5]

I have my flash disk 2TB always tells me that Write Protected disk when I copy files from my PC or even when I want to format it
How to remove this???
Write Protected Disk

 

[Diplomatic Imunnity]

Mkuu upo wapi nikusaidie

 

[Troll JF]

Mkuu upo wapi nikusaidie

Mbona hujamwambia akutumie advance

 

[kcamp]

I have my flash disk 2TB always tells me that Write Protected disk when I copy files from my PC or even when I want to format it
How to remove this???
Write Protected Disk

Click on Start and type in regedit
and open Registry Editor
Now inside Registry Editor follow the
path as shown here
HKEY_LOCAL_MACHINE/SYSTEM/
CurrentControlSet/Control/
StorageDevicePolicies
Now on the right side of the window
you will see WriteProtect word.
Double Click on it and set the Value
Data to ‘0’ (zero)
Here ‘0’ denotes that the Write Protection on
disk is OFF; whereas ‘1’ denotes Write
Protection on Disk in ON .
Close the Registry Editor for now. Do not
copy any files. Restart your Computer
first and then try to copy some files.

 

[Mbilikimo Mfupi]

Click on Start and type in regedit
and open Registry Editor
Now inside Registry Editor follow the
path as shown here
HKEY_LOCAL_MACHINE/SYSTEM/
CurrentControlSet/Control/
StorageDevicePolicies
Now on the right side of the window
you will see WriteProtect word.
Double Click on it and set the Value
Data to ‘0’ (zero)
Here ‘0’ denotes that the Write Protection on
disk is OFF; whereas ‘1’ denotes Write
Protection on Disk in ON .
Close the Registry Editor for now. Do not
copy any files. Restart your Computer
first and then try to copy some files.

Big up mkubwa, ngoja nikajarib na mimi

 

[Chichmoore]

Flash disk got write protected.
Msaada tafadhali.

 

[DissDotCom]

Mkuu unaweza pia kutumia hii njia hapa chini
Click start
then run regedit
go to this directory HKEY_LOCAL_MACHINE\SYSTEM\Currentcontrolset\control\
if you can't find StorageDevicePolicies under control folder
then make some new one. Follow this steps:

step 1:
go to this directory HKEY_LOCAL_MACHINE\SYSTEM\Currentcontrolset\control\
again and right click control folder

step 2:
select new, then click key and rename the new key #1 folder into
StorageDevicePolicies

step 3:
right click StorageDevicePolicies folder and select new DWORD(32-bit) Value
for 32-bit Operating System and select new DWORD(64-bit) Value
for 64-bit Operating System

step 4:
rename dword newer folder into WriteProtect, then double click WriteProtect
and change the value data into 0 with hexadecimal base, Then close regedit

step 5:
open my computer and refresh it 5 times without do anything to your usb, and
properly eject your flash drive

step 6:
plug in your usb again into your computer and format it using exfat instead of fat32


Now, you can use your flash drive again....

Au njia hii hapa chini...

start - run -regedit - HKEY_LOCAL_MACHINE\SYSTEM\Currentcontrolset\control\storatedevicepolicies


in right side you will be getting writeprotect option, just right click that and modify the value from 1 to 0.
Exit Registry

Restart your Computer and re-connect your USB pen drive on your computer.

Au njia hii hapa

1. open command prompt (cmd.exe)
2. type "diskpart"
3. type "list disk"
4. identify which one is your USB disk.

5. type "SELECT DISK n", where n is the number of your USB disk.
*** BE CAREFUL AT THIS PART. Selecting the wrong disk might delete your hard drives ****

6. type "clean", (you may need to repeat twice or thrice). If it doesn't work, don't proceed with the next instruction :-(
7. type "create partition primary"
8. type "select partition"
9. type "active"
10. type "format fs=ntfs"

Au njia ya mwisho hii hapa.

Try this:

For USB drives:

1. Open Start -> Run...
2. type diskmgmt.msc and press enter
3. right click on the partitin you want to format (where the leter and size is)
4. select 'Delete Partition...' and confirm
5. right mose button in the same place and select 'Create partition'
6. select primary partition
6. select size, file forma, disk leter, label etc should be all right if you leave defaults.
7. click ok

This will recreat the partition and format it in proper way. Helped me and will help to most of you if you have problem with MBR.

UBARIKIWE SANA

 

[Nichumu Nibebike]

Mkuu jaribu hili kwanza. Kwenye flash pale pembeni yake kuna kuwaga na ka switch... Kapeleke upande mwingine flash ndo itakuwa imefunguka, otherwise flash yako iwe hizi ambazo hazina ka switch...