Pata Maujanja kwa PC Zisizo na RAM kubwa

Pata Maujanja kwa PC Zisizo na RAM kubwa

SuperImpressor

JF-Expert Member
Joined
Oct 17, 2012
Posts
1,505
Reaction score
649
This is an info on how to use your
1,2,4,8, GB Memory card or Usb flash as a RAM for
your PC.
pls follow the steps below carefully.
1.INSERT YOUR MEMORY CARD INTO
YOUR CARD READER AU USB FLASH
2.RIGHT CLICK ON YOUR MOUSE.
3.CLICK ON <PROPERTIES>
4.CLICK ON READY BOOST
5.SELECT USE AND CLICK APPLY THEN
FOLLOWED BY O.K
YOU ARE GOOD TO GO
you can also use your mobile phone
with a compatible data cable by
choosing USB MASS STORAGE
connection.
Hii ni kwa watumiaji wa windows vista na windows 7
 
ngoja nikaitafute memory card yangu ya 1GB
 
You can achieve the same in XP by setting your paging file to a chunk of the USB memory. Particularly if your data transfer speed on the HDD is very slow.
 
you can achieve the same in xp by setting your paging file to a chunk of the usb memory. Particularly if your data transfer speed on the hdd is very slow.
tupe tutorial mkubwa!!
 
You can also
force Windows XP to use the USB stick
for its virtual memory instead of using
the hard drive. Virtual memory is
storage space used on the hard drive
when the computer's physical system
memory runs out of space. USB flash
drives tend to receive and transmit this
data a lot faster than a hard drive.
However, this procedure will probably
not increase performance if you have
more than 2GB of physical system
memory.
Difficulty:
Moderately Easy
Things You'll Need:
USB 2.0 flash drive (at least 1GB in
size)
USB 2.0 port
Instructions
1. Insert your USB 2.0 flash drive
into a USB 2.0 port on your
computer. Right-click on "My
Computer" and select
"Properties."
2. Click the "Settings" button in the
Performance section at the top.
Click on the "Advanced" tab.
3. Your flash drive will be labeled
Your flash drive will be labeled
according to its manufacturer.
Click the "Change" button toward
the bottom of the window. You
will see a window containing all
the drives attached to your
computer. Select your flash drive
(which is labeled according to the
name of the manufacturer).
4. Click the "System managed size"
radio button, then click the "Set"
button to confirm your change.
5. Click on your Windows drive in
the list at the top of the Window.
(It's the one with a "Paging File
Size" entry, drive C by default.)
Click the "No paging file" radio
button. Click the "Set" button,
then click the "OK" button and
restart your computer for the
change to take effect.
Tips & Warnings
If your copy of Windows is installed
on a solid state drive, this procedure
will not improve performance.
Additional physical system memory
is preferable to using a flash drive
for virtual memory.
The flash drive and USB port must
both be at least version 2.0 for this
procedure.
Afterward, do not remove the flash
drive without making the proper
changes with the Virtual Memory
tool first. Just remember that also you
can use your memory card by inserting it in usb card.Zidi kukumbuka kuwa usitunze file yoyote kwa hiyo flash.
 
Mkuu asante kwa elimu.naomba nikuulize swali lililo nje ya mada! Je nahitaji kuwa na pc yenye uwezo gani ili kufanya graphic designing kwa cs4 au cs5? natanguliza wingi wa asante hata kabla sijajibiwa.
 
1. Processor & Operating System
Your computer needs a 2
Gigahertz (GHz) or faster
processor and Windows XP
Service Pack 2, although
Service Pack 3 is
recommended, Vista with
Service Pack 1 (certified for
32-bit) or Windows 7
(certified for 32-bit). If using
a Mac, a PowerPC G5 or
multicore Intel processor
running Mac OS X v10.4.11
to 10.5.4 is required.
2. Memory
For Windows and Mac, 1
Gigabyte (GB) of RAM is
recommended.
3. Storage Space
For Windows, 9.3GB of
available hard drive space is
required for the installation
of the Adobe CS4 suite and
its temporary files. Adobe
CS4 will not install on flash-
based hard drives and
storage devices. If using a
Mac, 10.3GB of available
hard drive space is required,
and the suite will not install
on flash-based hard drives
and storage devices. Also,
your Mac system needs Java
Runtime Environment 1.5
installed in order for Adobe
Version Cue Server to run
properly.
4. Display
A 1024x768 display is
required for both Windows
and Mac, but a 1280x800
display is recommended with
a 16-bit video card, as well
as Shader Model 3.0 and
OpenGL 2.0 add-ins installed.
Your Windows computer also
needs DirectX 9 (with a
graphics card containing at
least 64 Megabytes (MB) of
VRAM) for the Bridge
component of Adobe CS4.
5. Additional Hardware
The suite needs a DVD-ROM
drive for loading the setup
programs and core files;
QuickTime 7.4.5 for
managing the multimedia
features of CS4; and a
broadband Internet
connection for accessing
online services and
features--as well as
registering the suite for
product updates.
 
Back
Top Bottom