Solution from Freesat.cnopenbox v8 combo reboots when I switch to a new channel. Any solution guys.
This seems to b a 1 Dec 2015 bug lol....
THE FIX:
Change the date setting from "GMT" to "User" and then change the month from 12 to 10.
Freesat have a fix.
freesat service
for the V8 Combo and
freesat service
for the V8 Pro.
Not to worry our boxes r not dead
FTA till the end 🙂
upgrade to the version dated 1st December then factory reset and start a fresh. Dont copy/upgrade user db or rather dont upgrade using your saved channels. Had a similar issue am now sorted. check freesat.cn for further advice.
Thanks Spora1. :A S thumbs_up:Solution from Freesat.cn
2015/12/01
Important Notice:
V8Combo/A5S/V8Pro will auto reboot when channel changed today.
Please do the following!
1) Power off the box
2) plug out the signal cable
3) Power on box
4) backup your channel list
5) update the last firmware
Download firmware from this link http://www.freesat.cn/v.asp?big=32&small=59&id=58
I have apstar 7 & is20 combined. apstar as primary. problem I can't achieve higher than 62% on kix(scratches during rainfall). has anyone had is20 as primary & succeeded? photo please
Is 20 as primary and apstar at top, vice-versa. Problem solved.
Shukran Boss... now watching Movie -TOWER HEIST on Top tv2. Box Office lovers, remembr MAD MONEY? This Movie is more less like it gotta watch it just incase you havent.
Its Top Tv 2 (MBC 2 HD?).
As for Champion tv, mine is under lock n key.
Anybody else?
I have prime focus Lnb KU band. I got a perfect holder where I attached it to my C band holder which am using for apstar and Intelsat. I tried all afternoon to nab Yamal 402 @ 54.9 East but wasn't successful... Guide me. Where am I going wrong??
OK move down one degree and nab sea 5 if your lnb is high gain you have to get 4.8e,5.2e and 7e on 90cm like me here
Thanks a dozen much Regiment Jey. This saved my day!Input 03794
Remember also there are two digits below ident. When filling in the keys, the first should be 00 and the second one be 01
I have prime focus Lnb KU band. I got a perfect holder where I attached it to my C band holder which am using for apstar and Intelsat. I tried all afternoon to nab Yamal 402 @ 54.9 East but wasn't successful... Guide me. Where am I going wrong??
upgrade to the version dated 1st December then factory reset and start a fresh. Dont copy/upgrade user db or rather dont upgrade using your saved channels. Had a similar issue am now sorted. check freesat.cn for further advice.
This new firmware for Openbox V8 Combo is only 5.65 Mb in size and it downloads as just "V8".
Have I got the right software considering that most previous updates are about 8.20 Mb in size?
Kindly please advise.
I have prime focus Lnb KU band. I got a perfect holder where I attached it to my C band holder which am using for apstar and Intelsat. I tried all afternoon to nab Yamal 402 @ 54.9 East but wasn't successful... Guide me. Where am I going wrong??
Yamal is below Is20 around 25-30cm use Tp 11044V40000
Yamal is below Is20 around 25-30cm use Tp 11044V40000
They all have been that size. Zipped ofcourse.Once you extract it will be the size you are used to
Which zipped file?
The file I downloaded is not zipped, so I assume it is the software file.
Have you downloaded it yet? Where and how did you download it to get a "zipped" version?