Aaaaarrghhh
JF-Expert Member
- Nov 2, 2017
- 671
- 269
Hey guys Who sells an 8ft motorised dish locally
You can motorise yoursHey guys Who sells an 8ft motorised dish locally
Hey guys Who sells an 8ft motorised dish locally
Buy a motor, fabricate. You may need a mover box if don't want to move it by manual swithes.
Unfortunately you may have to import from eBay.. etcI want to know where i can get those parts to motorize locally
is this the one
By the what is the approximate weight of 8ft dishThat's good...
However 8ft is too heavy for a 12v actuator..
Especially if you want to lift it off The horizon from measat to is20 oftenly.
A 24 or 36v actuator can do better for long
Mine I bought at Jumia but the 24v one I have seen 4 inches stoke length View attachment 1009432View attachment 1009433
Sent using Jamii Forums mobile app
What schematicsThis one that you bought from jumuia does it work ... can i get to the schematics
This is my fabricationView attachment 1009579View attachment 1009580
Sent using Jamii Forums mobile app
Ikiwa installed kwa dish itakuwa inaakaa aje ... that what i want to see
A China made 8ft weighs about 60 kg in totallity
My actuator is rated 1500N and is 12vA China made 8ft weighs about 60 kg in totallity
But what matters is the maximum pull force required to lift the dish face from farthest east or west
From my experience about 30kg pull force is required. Thats 300 Newtons
Most 12 V actuators are rated 220N pull force
If you place it to pull at 300N, the motor will overdraw current and overheat . It'll fry in time..