Mnyash
JF-Expert Member
- Feb 9, 2013
- 1,076
- 408
You're welcome....
Oh dear! Thank you for the brush mate! Gues I have to go check at the hardware or mal. Much appreciated.
Yeah! They completely disappeared last week for some three days, they came back for like 4 days now with 40 + FTA while some 20 plus encripted.
For me it doesn't matter coz its the F*Re TV (broadcasting Nyimbo za Injili) and the TZ local channels that keep my lnb fixed there.
FTA Good's at ABS
it happens occasionally from late last year
It's C-band (PX 2000) works very well.optus it that pauxis c/ku band lnb
Not at all bro. Indeed your advice was spot on. A toggling of the lnb setting from universal to 5150 finally gave out the correct c band frequency format. Thanks a lot for the enlightenment. The other problem with the S*y n*ews channel still stand; V7 combo fails to reel it in but 4922 does very easily.Sory if I may have jumped on your train. The only explanation I find to be valid in such experience is that in your V7 Combo you have set your Lnb frequency in Universal setting, this is the KU format not the CBand frequency format, thus giving you the KU freq format which is 9750/10600 or the other with /10700 or 10750 instead of the usual Cband format.
What you have to do is, in your satellite setting where you find lnb frequency change to 5150 that is the normal CBAND format that will give you the exact Cband frequency you see in flysat or lyngsat.
The button to press when you are there are the same with volume or channel change from your remote control.
Hope it is of some help.
Why he is right about what an allen key set is, am persuaded that the set of screws whose pictures you posted might as well be fit for the job. Typically such a set has flat, star, torx bits etc, but I think I saw in the picture more than one bit with a hexagonal cross-section towards the tip. Now that is an allen bit. May be you should wait and give it a try before heading out to the hardware for a new set. My thought.Oh dear! Thank you for the brush mate! Gues I have to go check at the hardware or mal. Much appreciated.
Sounds to me like he meant to ask if that was the dual or (is it combo) pauxis c and ku band lnbIt's C-band (PX 2000) works very well.
oh yes. 4094L11000Hi house?
Are these channels, AFN Pulse and AFN Sports 2, come along with usual tp for AFN 4097v10999 on 64E?
Thank you for your concern brother!Why he is right about what an allen key set is, am persuaded that the set of screws whose pictures you posted might as well be fit for the job. Typically such a set has flat, star, torx bits etc, but I think I saw in the picture more than one bit with a hexagonal cross-section towards the tip. Now that is an allen bit. May be you should wait and give it a try before heading out to the hardware for a new set. My thought.
Those that you have certainly wont work. I have that set of drivers. they are very tiny. what is needed has similar look but is the size of biro in diameterThank you for your concern brother!
I may have over looked my reply! I should have indicated that!
Meaning try first if all goes west follow what Munyaga has firmly stated.
Thank you!
By feeling[emoji13] [emoji1], but a prime focus points exactly at the satellite while offset dish points at an offset angle.How do you know elevation of prime focus dish
happens since they were left by Amos 5 after it MH370-ed and they started hopping from sat to sat.it happens occasionally from late last year
insert manually, its the only stubborn frequency to roll.Not at all bro. Indeed your advice was spot on. A toggling of the lnb setting from universal to 5150 finally gave out the correct c band frequency format. Thanks a lot for the enlightenment. The other problem with the S*y n*ews channel still stand; V7 combo fails to reel it in but 4922 does very easily.
Noted brother! Thank you!Those that you have certainly wont work. I have that set of drivers. they are very tiny. what is needed has similar look but is the size of biro in diameter
insert manually, its the only stubborn frequency to roll.
Just Checking. Why do we have such a large variation in the tp frequencies that a freesat v7 combo throws up on a blind scan compared to what is conventionally known on flysat, lyngsat etc? Case in point, on IS20 the S*n* S*x tp comes out as 3902 V 22222 on an SRT 4922 box (pretty close to the indicated 3900 V 22222 from flysat) , but the combo one indicates 10998 V 22221 (which looks like it should be a ku-band tp!)
I would not have minded much about this were it not for the snag in getting the S*y News tp (4197 v 4000) to dance. Surprisingly, a casual scan on the 4922 delivers it smoothly with key I fed in a long time ago, yet the combo with the latest patch fails. I tried to manually edit the tp in the combo, but it failed to accept it claiming "out of range".
Assistance rendered on this would be greatly appreciated house.
Yeah! They completely disappeared last week for some three days, they came back for like 4 days now with 40 + FTA while some 20 plus encripted.
For me it doesn't matter coz its the F*Re TV (broadcasting Nyimbo za Injili) and the TZ local channels that keep my lnb fixed there.
No! only 11596 and 11631.speaking of which, is the 11666 tp active over there? Mine has been off almost a week.