Mnyash
JF-Expert Member
- Feb 9, 2013
- 1,073
- 408
Whats your laptop internate is using wifi or modem, utp, it might be the geographical location where you are
I am to use an Orange modem connected directly to the decoder's USB port please.
Whats your laptop internate is using wifi or modem, utp, it might be the geographical location where you are
http://www.jamiiforums.co
That's good news, let's hope they are there to stay
hi all,
anyone who has ever used a non-segmented 180 cm primefocus dish?
is it any different from the segmented 180cm prime focus dish which u have to join with bolts and screws?
feedback is highly appreciated.
thnx.
http://www.flysat.com/nss12.php![]()
11026 H 11430 DVB-S
11554 H 3300 DVB-S2
seems like 11026Mhz is gone, could only get 11554Mhz pretty strong. an just some point of info added an lnb on my yahsat dish
I am to use an Orange modem connected directly to the decoder's USB port please.
there are the photos...........
Whats your laptop internate is using wifi or modem, utp, it might be the geographical location where you are
use internet.orange as APN.
Firmware only supports Huawei modems. ZTE modem does not work directly unless router used. Tried zte and the stb did not respond but the modem kept blinking red (prompt not accepted). Settled for a huawei which works like magic. Please Check under system settings/IP settings; if 3G option appears then modem supported, otherwise not recognized.I have input it too but it notified me of; connection failed time out. I tried to see whether it's fooling me and tried to open the channels but all of them were giving me an invalid channel feedback. Where could I be going wrong?
11026 H 11430 is alive, kicking, loud and clear.
Firmware only supports Huawei modems. ZTE modem does not work directly unless router used. Tried zte and the stb did not respond but the modem kept blinking red (prompt not accepted). Settled for a huawei which works like magic. Please Check under system settings/IP settings; if 3G option appears then modem supported, otherwise not recognized.
Hi flybird, if that's so then there might be an issue with the settings that I am entering because mine is a Huawei E3131A. When I plug it into the decoder it's blinking blue, the 3G option appears and fields for filling the APN, username and password......
munyaga and Qmeu and everyone thanx.
locals on NSS 12 are clear
seems the kenya mux at 60 e has finally docked at 57e. Another challenge has come! How do i fix another lnb between yahsat 1a and nss12 c band to get nss12 ku? If one can remember my 7 lnbs on 8ft setup, you can advice.
How did you adjust the lnb arm or the calculation you did to ensure the focal length is okay[/QUOTE
I just lowered the arm...the dish is not performing to the max cause of the arm,but soon am making a new arm.Will let you knw when am fully done .