how u open azam channels?how did u use 1 out disec to 2 stbs plzMore testing: after the successful 4x1-to-8x1 diseqc-to-2x1 splitter-to-2 stbs testing, I embarked on testing if one can receive other channels on the Az*m stb. Armed with an 8x1 diseqc switch using the disceqc 1.1 settings on the receiver, I used diseqc 1.1. I tested with about 4 birds. The results were impressive with both C & KU bands, but unfortunately the receiver is not pvu compliant. Hower, the stb was able to receive the non-pvu channels on C. I hence dropped the C bands and concentrated on KUs.
Here are some of the pictures of the results:
The settings on the stb
View attachment 438810 View attachment 438811 View attachment 438812
The results
View attachment 438813 View attachment 438814 View attachment 438815 View attachment 438817
can u send me some pix of ur disec too plzhow u open azam channels?how did u use 1 out disec to 2 stbs plz
I have also upgraded 4950h today with v 4.04 and then did factory setting but it was not autorolling after leaving it for more than 20 minutes.I had to manual put the keys for 68.5 satellite.But the challenge was for HD 24 of 57 degree satellite, I gave it time to autoroll maybe but no success. Am thinking of downgrading to v 3.58 which was working very well.This was my observation.Has anybody encountered the same?SRT4950H_V4.04p Dated Nov 17th 2016: Summary of my findings:
• Solving for identified bugs after release of the one dated October 21, 2016
• Is able to autoroll all the pvu keys on NSS*_12, IS20 and Ap7 (except 3920H 28340 on AP7) the earlier version did not autoroll most of the pvu keys on these satellites.
• Still not able to autoroll the above tp carrying the A-eX-eN and SQny mux on AP7 hence a manual key input required
• Autorolled these keys after 10 minutes on average.
• Retains the same light bluish theme that has come to be identified with 4950H lately
• All channels stable at sufficient signal levels (Q78% and above)
NB: back up your channel list and remember to factory reset your receiver after the SW update
and 2by1 splitter to 2 stbs is both stbs r working on same time?how u open azam channels?how did u use 1 out disec to 2 stbs plz
how u open azam channels?how did u use 1 out disec to 2 stbs plz
Check my post on page 1087.and 2by1 splitter to 2 stbs is both stbs r working on same time?
I also did upgrade mine and the autoroll wasn't working either I had to downgrade to 3.58.I have also upgraded 4950h today with v 4.04 and then did factory setting but it was not autorolling after leaving it for more than 20 minutes.I had to manual put the keys for 68.5 satellite.But the challenge was for HD 24 of 57 degree satellite, I gave it time to autoroll maybe but no success. Am thinking of downgrading to v 3.58 which was working very well.This was my observation.Has anybody encountered the same?
ok i c it,, but tell me i have intelsat 20 c plus ku,,, ses5east..eutelsat7east..paksat1r 38east c band,,, the way u have done it its working well then i think i must try it,,, bcoz now i m using dual lnbs c band n ku band for my 2stbs,,bcoz i m afraid that if i use 2by1 splitter may b if we r watching both stbs then 1stb not gona respond well,,what do u think?Check my post on page 1087.
can i have ur whatsapp number so that i can ask u in details,,bcoz my dual c band lnbs r not given me full signals like my single c band lnbCheck my post on page 1087.
Check at Alfa sounds electronics River Rd (at luthuli Ave junction), Khs.1500.Any one can sell to me a SRT 4922 remote? In Nairobi
Why do you need it? You aint a fun of ES-TWENTY-FOUR?Any one can sell to me a SRT 4922 remote? In Nairobi
On my side it autorolls most tps only a few don't ..... also, HD 24 autorolls faster than before.I have also upgraded 4950h today with v 4.04 and then did factory setting but it was not autorolling after leaving it for more than 20 minutes.I had to manual put the keys for 68.5 satellite.But the challenge was for HD 24 of 57 degree satellite, I gave it time to autoroll maybe but no success. Am thinking of downgrading to v 3.58 which was working very well.This was my observation.Has anybody encountered the same?
Hi forum members,any member from uganda locked on Yahsat 1A especially east beam.I wish to hear from you.On my side it autorolls most tps only a few don't ..... also, HD 24 autorolls faster than before.
sorry i need all frequency that you save to get free channelMore testing: after the successful 4x1-to-8x1 diseqc-to-2x1 splitter-to-2 stbs testing, I embarked on testing if one can receive other channels on the Az*m stb. Armed with an 8x1 diseqc switch using the disceqc 1.1 settings on the receiver, I used diseqc 1.1. I tested with about 4 birds. The results were impressive with both C & KU bands, but unfortunately the receiver is not pvu compliant. Hower, the stb was able to receive the non-pvu channels on C. I hence dropped the C bands and concentrated on KUs.
Here are some of the pictures of the results:
The settings on the stb
View attachment 438810 View attachment 438811 View attachment 438812
The results
View attachment 438813 View attachment 438814 View attachment 438815 View attachment 438817
your location plizI have managed to combine 70b and 68.5e KU using one lnb on 90cm offset. Signal quality for KTN on 70 is 70% and N%BCu is 60%