African Satellite World and Sat Gear

I hope so for it taking long and stories,4957,4955 and others have their,let go for brand that will autoroll
 
Hi friends
I have bought second hand offset dish 196cm without LNB arm and there is writes like this PRODELIN,INC 0179-189. so I would like to know LNB arm distance I am waiting to hear you as soon as possiple

Thanks
 
Also you will have to determine the angle between the Lhb hand and the dish. Any angle works, even if you put it in the prime position, you will milk the sky.
 
....now what do you set as ports for the various LNBs on the decoder settings?
 
Yes, you can use a 1x8 splitter but I think such a split may compromise the signal.
Again, yes, you can use upto 8 4x1 diseqc switches and connect them to the 8x1 switch.
 
....now what do you set as ports for the various LNBs on the decoder settings?
Check the pdf document I sent here. At the foot of it, you will see the settings I have on the two decoders.
 
No, you don't need to have a dual or quad lnb, as long as your receiver has a Diseqcq 1.0 and 1.1. However, if doesn't have, as I discovered with the Az*m decoder, then you may need to have it. Most of the FTA receivers I have handled have these two lines.
 

Hi,

Seems Discovery S9HD supports 4K HEVC of which is a plus for me.
Any sales locally?
 
Hi,

Seems Discovery S9HD supports 4K HEVC of which is a plus for me.
Any sales locally?
I saw it in one shop along sheikh karume rd, Nairobi. I did not inquire about the price because they were selling SRT 4920 at KES 7800/-
 
Can somebody help me.I have Tiger T245 Pro decoder which was installed autorol it worked for a month now but started freezing.I scan it then it could not open the power vu channels.I tried to reset it to factory setting but no solution.In fact I have realized that after factory setting it lost the patch menu.what can I do and can I get the autorol software to install it a fresh.
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…