kujua model ya simu,imei n.k ikiwa off

[C J]

Wakuu nataka driver itakayoniwezesha kupata details za simu ninapo iconnect kwenye computer wakati imezimwa aina za simu ni zenye chip ya mediatek

 

[Chief-Mkwawa]

nyuma ukitoa battery hakuna hizo detail?

 

[C J]

nyuma ukitoa battery hakuna hizo detail?

hakuna mkuu

 

[ymollel]

hakuna mkuu

Je simu yenyewe ni nzima? Na ni Mediatek Android?
tumia computer connect kwa USB na utumie software ya MTKDroid Tool, ikisha detect itakuambia kila kitu kuhusu simu hiyo.

 

[C J]

Asante mkuu hii software iko ready installed na nime connect simu but hainipi info zozote simu ni nzima je hakuna drivers yakuniwezesha kudect simu najaribu kuinstal mtk usb drivers still inazingua

 

[ymollel]

Asante mkuu hii software iko ready installed na nime connect simu but hainipi info zozote simu ni nzima je hakuna drivers yakuniwezesha kudect simu najaribu kuinstal mtk usb drivers still inazingua

unatakiwa kuInstall ADB drivers .. http://adbdriver.com/upload/adbdriver.zip

na kama unatumia windows 8, 8.1 au 10 inaweza kuzingua kwasababu hizo drivers hazijapita windows signature. Hivyo Run command zifuatazo.

1) Start Command Console as Administrator and write (to disable the signatures check:

> bcdedit /set loadoptions DISABLE_INTEGRITY_CHECKS

> bcdedit /set testsigning ON


2) Restart the Windows


3) Install the ADB USB driver(s),

confirm the installation for all questions asked by the system ...


UkishaInstall fanya hivi tena...

4) Start Command Console as Administrator and write (to return back the signatures check):

> bcdedit /set loadoptions ENABLE_INTEGRITY_CHECKS

> bcdedit /set testsigning OFF


5) Restart the Windows

 

[C J]

Nashukuru sana mkuu

 

[C J]

Nashukuru sana mkuu

Thanks

unatakiwa kuInstall ADB drivers .. http://adbdriver.com/upload/adbdriver.zip

na kama unatumia windows 8, 8.1 au 10 inaweza kuzingua kwasababu hizo drivers hazijapita windows signature. Hivyo Run command zifuatazo.

1) Start Command Console as Administrator and write (to disable the signatures check:

> bcdedit /set loadoptions DISABLE_INTEGRITY_CHECKS

> bcdedit /set testsigning ON


2) Restart the Windows


3) Install the ADB USB driver(s),

confirm the installation for all questions asked by the system ...


UkishaInstall fanya hivi tena...

4) Start Command Console as Administrator and write (to return back the signatures check):

> bcdedit /set loadoptions ENABLE_INTEGRITY_CHECKS

> bcdedit /set testsigning OFF


5) Restart the Windows

 

[C J]

Nina window 10