African Satellite World and Sat Gear

GIDEN · Sep 28, 2018

Munyaga said:
I am in Nyailofi, Jerusalem/Eastleigh neighborhood.

It would sound an insult but in Eastleigh neighborhood and you are asking for a cheap 6ft it sounds awkward. Just gather courage, take a stroll and enquire about the locations of scrap metal yards. You will get a good 6ft for 20-25$ . Try and look for caretakers and befriend/enquire for abandoned ones. Initially don't offer to buy but to dispose the crap but offer a token of appreciation. You will be surprised. getting one with an lnb for a song. All the best.

RankSat · Sep 28, 2018

GITHS said:
Someone came and decided that I cannot be watching FTA channels and stole my dish over the weekend while I was on night duty it was Bb dish hooked on nilesats so imenibidi nihame to a more secure place

Hujumaa!! Ugua pole kaka.

Nabahaniya · Sep 28, 2018

Vicwa said:
Give it a try. I'm using the same size (offset) in Nairobi.

Nameza mate nikiona picha unazopost, now my nine girls r gone, I wish I can get my hands on this 🐦,and be successful

Nabahaniya · Sep 28, 2018

GIDEN said:
It would sound an insult but in Eastleigh neighborhood and you are asking for a cheap 6ft it sounds awkward. Just gather courage, take a stroll and enquire about the locations of scrap metal yards. You will get a good 6ft for 20-25$ . Try and look for caretakers and befriend/enquire for abandoned ones. Initially don't offer to buy but to dispose the crap but offer a token of appreciation. You will be surprised. getting one with an lnb for a song. All the best.

Ha ha ha

freq · Sep 28, 2018

RankSat said:
🙂🙂 chunga tranjiforma my fren.

😁😁 Hahaha..

Mnyash · Sep 28, 2018

GIDEN said:
It would sound an insult but in Eastleigh neighborhood and you are asking for a cheap 6ft it sounds awkward. Just gather courage, take a stroll and enquire about the locations of scrap metal yards. You will get a good 6ft for 20-25$ . Try and look for caretakers and befriend/enquire for abandoned ones. Initially don't offer to buy but to dispose the crap but offer a token of appreciation. You will be surprised. getting one with an lnb for a song. All the best.

Ha ha GIDEN, I have done that and I nearly got pissed up by 2 yards. Believe you me they were selling a 90cm at $30 more than twice the price of a new one and they dared ask me whether I want it complete or the dish only to which I retorted that even the one that I am using I bought when new and it didn't cost me more than a half of their lowest price. Both couldn't go below $25 for dish only!

Thank you, a way will open.

Tolgos · Sep 28, 2018

GIDEN said:
Thats a paytv decoder. If you read some information here you would have learnt that. You need a full FTA decoder to enjou.

You cannot mix milk with parafin. Get FTA decoder and be free.............

GIDEN · Sep 28, 2018

Tolgos said:
You cannot mix milk with parafin. Get FTA decoder and be free.............

[emoji16][emoji16][emoji16][emoji16]

Aaaaarrghhh · Sep 28, 2018

8ft iko 18w ......i want to move it to 5w .......sina finder at the moment .....anyone to help

gango2 · Sep 28, 2018

ha ha haaa

Let Love Reign · Sep 28, 2018

Aaaaarrghhh said:
8ft iko 18w ......i want to move it to 5w .......sina finder at the moment .....anyone to help

Very simple!
Have your decoder and a monitor screen close by. Set your decoder to beep when the sat is hit, Input the 8w tp first lest you bypass 5w. Use this one 3926v 30000 (I assume its Cband that you target just by the mere mention of 18 w.
Then while on the back of your 8footer, lift your dish up slowly by like 3-4 inches and you will start hearing the beeping BPM increases, then azimuth your dish to the right a bit and you will hit the green high. That way you know you are close to 5w. And at this juncture I can attest 8w is far better for cband than 5w.
Alright. Once your are there, input this tp. 3712 V 4250 for crtv then elevate your dish slowly again for like an inch and your are there!

NB.
When you are on 8 west. It's possible you may hit that signal high but if you by interest would like to scan it may not yield any channel, if that the case turn the dielectric bar on the other marks whether cutting between the lnb iner probes or the other way.

GITHS · Sep 28, 2018

Giden I have sent a pm

Aaaaarrghhh · Sep 28, 2018

freq said:
8ft progresses at about 2° per inch moved. Means you have to move the elevation support about 11 inch to shift from 18w to 5e.

Edit: wait do you want 5w or 5e?

nyotatimes ziko wapi kwani

Aaaaarrghhh · Sep 28, 2018

Let Love Reign said:
Very simple!
Have your decoder and a monitor screen close by. Set your decoder to beep when the sat is hit, Input the 8w tp first lest you bypass 5w. Use this one 3926v 30000 (I assume its Cband that you target just by the mere mention of 18 w.
Then while on the back of your 8footer, lift your dish up slowly by like 3-4 inches and you will start hearing the beeping BPM increases, then azimuth your dish to the right a bit and you will hit the green high. That way you know you are close to 5w. And at this juncture I can attest 8w is far better for cband than 5w.
Alright. Once your are there, input this tp. 3712 V 4250 for crtv then elevate your dish slowly again for like an inch and your are there!

NB.
When you are on 8 west. It's possible you may hit that signal high but if you by interest would like to scan it may not yield any channel, if that the case turn the dielectric bar on the other marks whether cutting between the lnb iner probes or the other way.

very elaborative steps ....... thank you for that

Let Love Reign · Sep 28, 2018

Aaaaarrghhh said:
nyotatimes ziko wapi kwani

I have told you, make a station point at 8w. Nyota ziko hapo.

Aaaaarrghhh · Sep 28, 2018

Let Love Reign said:
I have told you, make a station point at 8w. Nyota ziko hapo.

thanks for the clarification

Aaaaarrghhh · Sep 28, 2018

Aaaaarrghhh said:
very elaborative steps ....... thank you for that

just another question ...,.,.how do i set my freesat v7hd to beep

freq · Sep 28, 2018

Oooh ! 8W. Move by about 5 inch.. though skew will be a problem. Use channels tv tp to track..

Thought you were after the jeshis

Aaaaarrghhh said:
nyotatimes ziko wapi kwani

freq · Sep 28, 2018

Tolgos said:
You cannot mix milk with parafin. Get FTA decoder and be free.............

But you can boil milk using paraffin. Bb dish could be used as paraffin to boil things at 7w

Aaaaarrghhh · Sep 28, 2018

Aaaaarrghhh said:
just another question ...,.,.how do i set my freesat v7hd to beep

i have seen the beeper

African Satellite World and Sat Gear

JF-Expert Member

JF-Expert Member

Member

Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

Similar Discussions