Swali kwenu mafundi umeme

wa stendi · Feb 11, 2020

Hivi sehemu ambayo kumefungwa feni liwe panga boy au kata kiuno (ciling fan) mimi nikatoa hapo lile feni nikaacha ile regulator zile wire za feni nikafunga hapo streight holder na kupachika hapo balbu (eneg sever)hivi nikienda kuwasha kwenye swich na kuzungusha regulator gia 1,2.3.4.5 hivi ile taa itaongezeka mwanga?

Naomba kujuzwa mimi sikusomea umeme na kama haliwezekani tatizo litakuwa nini maana karenti zinazoingia pale na zile zile live na neturo.

Kamwene kamwene · Feb 11, 2020

Mwanga utatoka kulingana na watts husika ya bulb

The Icebreaker · Feb 11, 2020

Yaani unataka mwanga wa bulb nao uongezeka kama vile feni inavyoongeza speed ya rotation baada ya kuongeza speed namba 1...2...3...4...5? Mwanga wa Bulb unategemea Watts ya bulbu yenyewe kama alivyojibu mkuu Kamwene kamwene

Ngalikihinja · Feb 11, 2020

Ok,
Kuna switch zamani zilikuwa zinaitwa Dimmer switch. kwa incandescent lamps, ukiipa umeme mdogo kuliko utakiwao kwake, itawaka kwa mwanga mdogo sana ... na ukishusha zaidi itawaka kidogo zaidi kuelekea kutowaka kabisa.

Sasa kwa energy server, ukiipa umeme mdogo itawaka kidogo ingawa ina kiwango kidogo sana cha kuvumilia umeme mdogo ukiilinganisha na incandescent lamp. Hivyo kujibu swali lako, inapunguza mwanga kutegemeana na posirion ya switch. Ila kama umeme utaenda chini ya uwezo wake wa kuwaka, haitawaka...

Transistor · Feb 11, 2020

Theoretically jibu ni ndiyo hasa kama regulator inatumia resistor,na ukafunga taa ya element bulb au na siyo energy saver,pia jibu itakuwa hapana kama regulator inatumia capacitor.

All in all practical ndiyo hutoa majibu ya kweli,kajaribu ila kuwa mwangalifu,kumbuka umeme unasafiri kwa speed ya mwanga,hivyo kama kuna kosa huwez zaia ni PAAAAAH!!

Ngalikihinja · Feb 11, 2020

The Icebreaker said:
Yaani unataka mwanga wa bulb nao uongezeka kama vile feni inavyoongeza speed ya rotation baada ya kuongeza speed namba 1...2...3...4...5? Mwanga wa Bulb unategemea Watts ya bulbu yenyewe kama alivyojibu mkuu Kamwene kamwene

Itategemea uwezo wa bulb (watts) na umeme unaokwenda... ukiwa zaidi itaungua (voltage) na ukiwa mdogo itawaka kidogo kwa maana ya kiasi cha mwanga... na ikiwa kidogo zaidi ya minimum capacity haitawaka....ie not fixed value but a range

Transistor · Feb 11, 2020

Ngalikihinja said:
Itategemea uwezo wa bulb (watts) na umeme unaokwenda... ukiwa zaidi itaungua (voltage) na ukiwa mdogo itawaka kidogo kwa maana ya kiasi cha mwanga... na ikiwa kidogo zaidi ya minimum capacity haitawaka....ie not fixed value but a range

Umeme unazidi kivipi mkuu ukifunga regulator?
Hapo umeme hautazidi ila utakuwa sawa au chini ya kiasi cha supply

kelphin · Feb 11, 2020

Kwenye ile switch ya fen Kuna resistors za value tofauti, Anyways tutolee mfano kunabomba kubwa la maji.

Halafu kunapipe zenye kipenyo tofaut tofaut zinachukua maji kwenye bomba Hilo
Hope kiwango Cha maji kitakachotoka kwenye pipe hzo sio sawa ikilinganishwa na kipenyo chake

The same
Sawa na Kua na resistors za 10 ohms....na 10k..na 47k na 100k zote hizi zikiunga kwenye njia moja ya umeme output zake haziwez kua sawa. Maana yake currents zinazotoka kwenye 10ohm so sawa na itakayotoka kwenye 100k.

Hivyo inawezekana taa ikawaka mianga tofauti ikilingana na uliposelect as a fan speed.

kelphin kepph

Ngalikihinja · Feb 11, 2020

Transistor said:
Umeme unazidi kivipi mkuu ukifunga regulator?
Hapo umeme hautazidi ila utakuwa sawa au chini ya kiasi cha supply

Kuna over voltage due to fluctuations...

Transistor · Feb 11, 2020

Ngalikihinja said:
Kuna over voltage due to fluctuations...

Flactuation inatokea katika nini?
Source of power supply au regulator?

Ngalikihinja · Feb 11, 2020

Transistor said:
Umeme unazidi kivipi mkuu ukifunga regulator?
Hapo umeme hautazidi ila utakuwa sawa au chini ya kiasi cha supply

Usiasahau regulator ya speed ya fan siyo voltage steblizer

dronedrake · Feb 11, 2020

energy seva nyingi sio dimmable, ili ifanye unavyotaka wewe lazima taa iwe dimmable, zipo spesho pale kkoo mtaa wa gogo/narung'ombe

Chaliifrancisco · Feb 11, 2020

Inawezekana lakini sio kwa kila aina ya bulb. Ni kwa incandescent bulbs na dimmable LEDs.

wa stendi · Feb 11, 2020

Je nikizungusha regulator hautoongezeka?

Kamwene kamwene said:
Mwanga utatoka kulingana na watts husika ya bulb

wa stendi · Feb 11, 2020

Kwa hiyo hapo jibu nichukue lipi

Ngalikihinja said:
Ok,
Kuna switch zamani zilikuwa zinaitwa Dimmer switch. kwa incandescent lamps, ukiipa umeme mdogo kuliko utakiwao kwake, itawaka kwa mwanga mdogo sana ... na ukishusha zaidi itawaka kidogo zaidi kuelekea kutowaka kabisa.

Sasa kwa energy server, ukiipa umeme mdogo itawaka kidogo ingawa ina kiwango kidogo sana cha kuvumilia umeme mdogo ukiilinganisha na incandescent lamp. Hivyo kujibu swali lako, inapunguza mwanga kutegemeana na posirion ya switch. Ila kama umeme utaenda chini ya uwezo wake wa kuwaka, haitawaka...

wa stendi · Feb 11, 2020

Kwani fan halina wats?

The Icebreaker said:
Yaani unataka mwanga wa bulb nao uongezeka kama vile feni inavyoongeza speed ya rotation baada ya kuongeza speed namba 1...2...3...4...5? Mwanga wa Bulb unategemea Watts ya bulbu yenyewe kama alivyojibu mkuu Kamwene kamwene

wa stendi · Feb 11, 2020

Ngoja nikajaribu [emoji1]
Msiponiona humu mje kunitembelea mwananyamala

Transistor said:
Theoretically jibu ni ndiyo hasa kama regulator inatumia resistor,na ukafunga taa ya element bulb au na siyo energy saver,pia jibu itakuwa hapana kama regulator inatumia capacitor.

All in all practical ndiyo hutoa majibu ya kweli,kajaribu ila kuwa mwangalifu,kumbuka umeme unasafiri kwa speed ya mwanga,hivyo kama kuna kosa huwez zaia ni PAAAAAH!!

wa stendi · Feb 11, 2020

Vipi itaungua au mwanga utaongezea

kelphin kepph said:
Kwenye ile switch ya fen Kuna resistors za value tofauti, Anyways tutolee mfano kunabomba kubwa la maji.

Halafu kunapipe zenye kipenyo tofaut tofaut zinachukua maji kwenye bomba Hilo
Hope kiwango Cha maji kitakachotoka kwenye pipe hzo sio sawa ikilinganishwa na kipenyo chake

The same
Sawa na Kua na resistors za 10 ohms....na 10k..na 47k na 100k zote hizi zikiunga kwenye njia moja ya umeme output zake haziwez kua sawa. Maana yake currents zinazotoka kwenye 10ohm so sawa na itakayotoka kwenye 100k.

Hivyo inawezekana taa ikawaka mianga tofauti ikilingana na uliposelect as a fan speed.

kelphin kepph

wa stendi · Feb 11, 2020

dronedrake said:
energy seva nyingi sio dimmable, ili ifanye unavyotaka wewe lazima taa iwe dimmable, zipo spesho pale kkoo mtaa wa gogo/narung'ombe

Ile ya kimulimuli au[emoji23][emoji23][emoji23]

Chenchele · Feb 11, 2020

Theoretically it should work if and only if that energy server is dimmable and the Electrical ratings are all bound to that energy server.

Read the Electrical information of your energy server, the wiring system and its regulator has got no problems.

Fan's regulator for speed control doesn't guarantee that your lamp might work the same despite of all being the Electrical loads.

It all depends on whether the energy server is dimmable or not plus the Electrical ratings, read its technical manufacturer's information.

Be ware, safety first , kama hujui nini kitatokea then mwite fundi au tafuta right dimmer yenyewe.

Swali kwenu mafundi umeme

JF-Expert Member

JF-Expert Member

Platinum Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

JF-Expert Member

Similar Discussions