Je wajua kama umelock bios ya computer yako ina weza toka(chizicomputer)

[edjizzo]

KATIKA NJIA ZA KUFANYA ZIPO NJIA NYINGI ZA KUFANYA KWA HARDWARE AU SOFTWARE
HARDWARE
SEHEMU YA CMOSS BETTRY HITOE KWA MUDA WA SIKU MBILI HILI AC ZIPOTE KUMBUKUMBU
KAMA IMESHINDIKANA
SOFTWARE
DOWNLOAD HEREEN'S BOOTS CD 12
WWW.KICKASSTORRENT.COM
ASANTEN
CHIZICOMPUTER
edjizzo@yahoo.com
0712484995

 

[Amoeba]

KATIKA NJIA ZA KUFANYA ZIPO NJIA NYINGI ZA KUFANYA KWA HARDWARE AU SOFTWARE
HARDWARE
SEHEMU YA CMOSS BETTRY HITOE KWA MUDA WA SIKU MBILI HILI AC ZIPOTE KUMBUKUMBU
KAMA IMESHINDIKANA
SOFTWARE
DOWNLOAD HEREEN'S BOOTS CD 12
WWW.KICKASSTORRENT.COM
ASANTEN
CHIZICOMPUTER
edjizzo@yahoo.com
0712484995

Hv wewe una user names mbili?

 

[Kang]

A few minutes zinatosha ukichomoa battery, au badilisha CMOS jumpers.

Pia kuna Laptop nimekutana nazo, CMOS password haifutiki ukichomoa battery ni security feature kama ikiibiwa data zisivuje.

 

[Kang]

A few minutes zinatosha ukichomoa battery, au badilisha CMOS jumpers.

Pia kuna Laptop nimekutana nazo, CMOS password haifutiki ukichomoa battery ni security feature kama ikiibiwa data zisivuje.

 

[edjizzo]

sikia mtunga sheria ndio muaribu sheria siku zote nilikuwa nazani aiwezekani ina wezekana kwa sababu si technology ipo nyuma

 

[CalvinPower]

KATIKA NJIA ZA KUFANYA ZIPO NJIA NYINGI ZA KUFANYA KWA HARDWARE AU SOFTWARE
HARDWARE
SEHEMU YA CMOSS BETTRY HITOE KWA MUDA WA SIKU MBILI HILI AC ZIPOTE KUMBUKUMBU
KAMA IMESHINDIKANA
SOFTWARE
DOWNLOAD HEREEN'S BOOTS CD 12
WWW.KICKASSTORRENT.COM
ASANTEN
CHIZICOMPUTER
edjizzo@yahoo.com
0712484995

hapo kwenye red ni kitu gani? sijaelewa. mimi najaribu kutengeneza software inayohusiana na hiki kitu je waweza nisaidia data kidogo?kwenye vb6, delphi, au .net. nitapost screen shot hapa

 

[WIRELESS]

Jamaa anajitahidi lakini anashindwa kuandika kiswahili vizuri, ila awasiliane na MD ili alipie matangazo.
Ninavyojua mimi ukitoa cmos ukizima computer you dont have to wait for two days, ni hapo kwa hapo ukiwasha memories zinakuwa zimefutika

 

[Herbalist Dr MziziMkavu]

KATIKA NJIA ZA KUFANYA ZIPO NJIA NYINGI ZA KUFANYA KWA HARDWARE AU SOFTWARE
HARDWARE
SEHEMU YA CMOSS BETTRY HITOE KWA MUDA WA SIKU MBILI HILI AC ZIPOTE KUMBUKUMBU
KAMA IMESHINDIKANA
SOFTWARE
DOWNLOAD HEREEN'S BOOTS CD 12
WWW.KICKASSTORRENT.COM
ASANTEN
CHIZICOMPUTER
edjizzo@yahoo.com
0712484995

Did you REALLY clear the CMOS? This is just a quick guide on the best way I have found to ensure that a CMOS is reset.

This is also a good technique to ensure that you drain power from the system to reset any circuits that may have tripped out on a resetable fuse (for example network cards and onboard USB hubs.) If you just want to do this, and not clear the CMOS, then ignore the "Change the Jumper" section of the guide.

Cut the Power

The ATX standard is such that an ATX power supply provides a constant 5V to the system's motherboard. This is what allows it to come out of standby, perform a normal power up, and also shut itself off. This also means that even if the system is "off" it will still have power to it.

Ensure the system has no power by turning off the PSU at the switch on the back, or even better, turn if off at the wall socket.

Change the Jumper

As with any work inside a PC, observe anti-static precautions.

To clear the CMOS there will probably be a jumper on the motherboard. Your motherboard manual will help you locate it. Usually the clear CMOS header consists of three pins, two of which are shorted by a jumper. Moving the jumper from one pairing to the other possible pairing will usually drain power to the CMOS. Below is a picture of one of my motherboards, with the clear CMOS jumper block highlighted in red:

​

If you can't find it, or aren't certain you've found the right jumper headers, don't worry. Instead, just take the battery out!

Making sure the system is discharged

I find this particularly useful for ensuring the resetting of any fuses that may have tripped (I had to do this a lot with a network card that didn't like hibernation mode.) It should also ensure a discharged CMOS.

With the power to the PSU off, press the power button on the front of the computer. This will attempt to latch on full power to the system and start it up. Of course, it won't get very far, but you may get a flicker of light and fans spinning briefly. All power has now been used for sure!

Power up Again

Set the CMOS jumper back, or put the battery back in. Now turn power back on, and press the power button. Hopefully you'll be prompted about a checksum error, and asked to enter the BIOS setup. Away you go!

If you weren't resetting the CMOS, and were just checking to see if that dead onboard USB hub had just tripped out - then hopefully it is now working