nahdy
JF-Expert Member
- Jun 13, 2014
- 228
- 67
mcmedards... can we have a screen shot of the settings of is20 from ur decoder.....
mcmedards... can we have a screen shot of the settings of is20 from ur decoder.....After several hours of hunting, i managed to nab Is20 Ku band, but when changing the lnb to C band nothing pops up, My doughty though I am confused with C band lnb type settings in the decoder because it scans tps which are out of range from what see in the Lyngsat. Can someone help?
For now I am away from it, but will post as soon as I get back at home.mcmedards... can we have a screen shot of the settings of is20 from ur decoder.....
KTN and Family are temporarily off on 70e but as for Amos 5, it disappeared without trace. However, the channels (continental package) went to ABS 3a but no longer FTA.Hi mates
Anyone with an idea of where I can find family tv, I can't find it on 70e and amos 5 is no longer there
Mcmedards, have u changed the settings from ku to c? e.g lnb frequency, universal to single etc.......After several hours of hunting, i managed to nab Is20 Ku band, but when changing the lnb to C band nothing pops up, My doughty though I am confused with C band lnb type settings in the decoder because it scans tps which are out of range from what see in the Lyngsat. Can someone help?
thats seem to be my ploblem, how do I change the settings to go with c band lnb, I see more than three lnb type and I do not know which is for c bands, as for Ku is universal.Mcmedards, have u changed the settings from ku to c? e.g lnb frequency, universal to single etc.......
Select the Sattelite with C eg Intelsat7/10 C or Insat C.... (If you are using Strong 4922, Press Menu, select Installation (Pswrd 0000) select "Dish Setting and chose the satellite) LNB for C-Band Using 5150 not universal.thats seem to be my ploblem, how do I change the settings to go with c band lnb, I see more than three lnb type and I do not know which is for c bands, as for Ku is universal.
Ok, I am using 4922, Now this 5150 is available on lnb type called single, My bad I was selecting OCS and Universal during scan and gave me wrong ranges of tps. I will try this and post the resultsSelect the Sattelite with C eg Intelsat7/10 C or Insat C.... (If you are using Strong 4922, Press Menu, select Installation (Pswrd 0000) select "Dish Setting and chose the satellite) LNB for C-Band Using 5150 not universal.
This should work. Blind scan.Ok, I am using 4922, Now this 5150 is available on lnb type called single, My bad I was selecting OCS and Universal during scan and gave me wrong ranges of tps. I will try this and post the results
Hae Bro. Thanks for helping out the bro from South. Hope he is sorted. In my guide i had told him to change settings to CbandThis should work. Blind scan.
I personally don't think so. 4922 itself is almost becoming obsolete. Get 4950hIs there any hope of PowerVu software for SRT 4900?
Just acquired one used but in good condition.
Any new SW for SRT 4900?
Can PV work on this model?
<br />Can you post the transponder and symbol rate being received please. Is your receiver Mpeg4?, Try skewing and see if anything pops. Inform the house whether you have 10804H30000.[quote uid=267330 name="bostephen" post=15536289]Am located in Kampala - Namugongo and actually I get all the active tp's on the sat through blind scan plus more than what I even see on lyngsat, altogether about 18 tp's but no single channel comes. <br /><br />NB:<br />My reciever is the type that shows signal even when no Lnb is connected. Iam only able to see quality for me to guage how much signal I have.
Nice swa (sic) munyaga.... i thot it was a catch saying e.g. mtaka cha mvunguni..... I was about to ask you to complete the phrase Uzi usiofaa .... ??? 🙂
<br />Can you post the transponder and symbol rate being received please. Is your receiver Mpeg4?, Try skewing and see if anything pops. Inform the house whether you have 10804H30000.[quote uid=267330 name="bostephen" post=15536289]Am located in Kampala - Namugongo and actually I get all the active tp's on the sat through blind scan plus more than what I even see on lyngsat, altogether about 18 tp's but no single channel comes. <br /><br />NB:<br />My reciever is the type that shows signal even when no Lnb is connected. Iam only able to see quality for me to guage how much signal I have.
You are on 7e not 16e raise your dish[/QUOTE]<br />Can you post the transponder and symbol rate being received please. Is your receiver Mpeg4?, Try skewing and see if anything pops. Inform the house whether you have 10804H30000.
My reciever is full HD, and as I said earlier, I get all the active tp's on the sat through blind scan plus even more than what I even see listed on lyngsat. l have tried all angles of skew both all positive & negative values, azimuth possibilities, plus ofcourse elevation...
View attachment 329513