mah-mah123
JF-Expert Member
- Apr 8, 2013
- 250
- 22
Is the freesat V8 golden available in the market in Kenya?
Only 4950 series. More Software's will be released has Auto - Roll for New Key Codes.. .. For 4930 / 4902 / 4922 /4920a / 4920KSA /4930L.Does 4955 have an autoroll patch?
That's good news,thanks for thatktn tv and ktn news is back at 70e
My friend explain your point clear and see if members can help,do u mean the code for your universal remote or the pin code for your receiver?Hello every one,Greetings to y'all!
i have this reciever called WizTech wiz-8010 hd classic.a couple of weeks ago,i lost its remote control and it's not available in the market around where i'm.the only option i have now is to use a universal remote.but the problem is i don't have(know) the 3 digit programming code of this reciever.
It'd be great if some one could please help me on a little explanation about the programming procedure and telling me the 3 digit code for the STB i stated above!!
Thanks in advance!
Different remotes use different methods to pair RF signals. The most common you point the remote at the decoder and continuously press power button on the remote until it switches the decoder off. Then it has successfully paired the signals. Please i hope you bought the correct remote. There are universal remotes for Tv,DVD,Hometheatre, decoder, and combo universal remotes which are intelligent you just press set and they automatically search for your signal source.My friend explain your point clear and see if members can help,do u mean the code for your universal remote or the pin code for your receiver?
Msaada Wakuu hivi Hizi satellite dish za zamani kabla yakuja s
Msaada wapi naweza kupata 1.8m offset dish TanzaniaMsaada Wakuu hivi Hizi satellite dish za zamani kabla yakuja star times bado zinapokea FTA channels? Za Tz au Kenya?
Kindly share what you got.Managed to get Thor 5/6 0.8w. Interesting stuff. Thanks vicwa/giden
It can be done, you will do it. I have just revived my 4950H! It took replacement of the motherboard, which had fried. It cost US$35 and had to come from the Strong agent in Kinshasa. It couldn't have come at a better time than now, when 4950H is autorolling. Now the receiver is updated with V. 3.58 and autorolled all the pvu channels that I am receiving from 57, 68 and 76.Gich, Thanks 4 a +ve encouragement. I hope mine is not ending that route.
pliz,enlighten us with the hardware your using n how u went about itManaged to get Thor 5/6 0.8w. Interesting stuff. Thanks vicwa/giden
Congrats bro', how much are they selling the decoders. ?Am a little short to enquire from them due to language barrier.It can be done, you will do it. I have just revived my 4950H! It took replacement of the motherboard, which had fried. It cost US$35 and had to come from the Strong agent in Kinshasa. It couldn't have come at a better time than now, when 4950H is autorolling. Now the receiver is updated with V. 3.58 and autorolled all the pvu channels that I am receiving from 57, 68 and 76.
The replaced motherboard
View attachment 410325
The results
View attachment 410319 View attachment 410320 View attachment 410324View attachment 410326 View attachment 410327View attachment 410329 View attachment 410330
Thanks. Now I am test viewing it, currently watching AX* on Ap7. The guy who sold me the motherboard informed me that he could sell the H at US55-60. I later came to realize that he also speaks English.Congrats bro', how much are they selling the decoders. ?Am a little short to enquire from them due to language barrier.
Sorry for not explaining my case clearly!My friend explain your point clear and see if members can help,do u mean the code for your universal remote or the pin code for your receiver?
Thanks for your assistance,Sir!Different remotes use different methods to pair RF signals. The most common you point the remote at the decoder and continuously press power button on the remote until it switches the decoder off. Then it has successfully paired the signals. Please i hope you bought the correct remote. There are universal remotes for Tv,DVD,Hometheatre, decoder, and combo universal remotes which are intelligent you just press set and they automatically search for your signal source.
Sorry guys,link is not working!Thanks for your assistance,Sir!
Can't upload the pic. of my URC.it says Shamel 2000 in 1 universal remote control. you see the pic from this link:
global-4-lvs-turing.opera-mini.net/hz02-02-01/117394/1/-1/sib7.com/6a9559811dff62597922b54116c25b4c3ae79bb1/32134_(1)_SiB7.jpg
Thanks again!
It can be done, you will do it. I have just revived my 4950H! It took replacement of the motherboard, which had fried. It cost US$35 and had to come from the Strong agent in Kinshasa. It couldn't have come at a better time than now, when 4950H is autorolling. Now the receiver is updated with V. 3.58 and autorolled all the pvu channels that I am receiving from 57, 68 and 76.
The replaced motherboard
View attachment 410325
The results
View attachment 410319 View attachment 410320 View attachment 410324View attachment 410326 View attachment 410327View attachment 410329 View attachment 410330