Have you tried disconecting LNB signal cable and restarting ?I have a strong 4922 it has stopped working message displayed on receiver is lnbf can someone repair it for me I an in Nairobi Tele 0733 873 268
why didnt you use a scalar ring ?
#RankSat, Hi. what skew should i have used? I used the 90 degrees [clockwise] skew rule but it seems it didn't work for me. How far should i push the teflon? I was almost concluding Eurostar ESCDT-700 twin was a fake product !!! 😕😕😕
I have a strong 4922 it has stopped working message displayed on receiver is lnbf can someone repair it for me I an in Nairobi Tele 0733 873 268
You might be right bro. RankSat is using a 2.4m dish and yours is 1.8m.
I have. 240cm pf dish, 4950H, Eurostar ESCDT-700 Dual LNB.
#Ras Kush, Hi. what skew should i have used? I used the 90 degrees [clockwise] skew rule but it seems it didn't work for me. How far should i push the teflon? I was almost concluding Eurostar ESCDT-700 twin was a fake product !!! 😕😕😕
The standing pole I'm using on a 2.4m dish was for 68 inches wire mesh dish, which I'm using @38e without the standing pole.Vicwa This must be the very pinnacle of ASAS madness oooh! Can you imagine... well done coz you just hit the zenith Bro.
By the way, did I just see something at the core - must be another "Chinese" holder. I beg, please post a snapshot of the entire stand now.
I said it... and now an active incomplete mesh dish.The standing pole I'm using on a 2.4m dish was for 68 inches wire mesh dish, which I'm using @38e without the standing pole.
View attachment 364901
View attachment 364902
@38e
View attachment 364911
Is 22 @72e active for now? A week before I had add it and it was loud & clear on tp 3742 L 13930 Q78% and tp 3742L 16073 Q70% but on the same day removed lnb. This week on Tuesday I tried on the same tps but they were not active, but added Yamal 402 @54.9e.Vicwa if you like try and sandwich Eutelsat70B between 76.5e&68.5e. I have done it with immense success. I also succeeded in adding @55e far below Apstar.However setting @57e Ku-band is easy though. At any rate nani amefaulu nss12 c-band jameni?
Besides I also wish to try measat on the same setup coz I like watching CI in hd.
Hi kiruri,the said channel is available across different sats.hopefully,theyre not going to encrypt all the sources.i must say its hard to stay away from the HD version on 68.5e!Hello house. Im curious to know if con@x kiz are available anywhere. One of the ch@nnels l watch (en h kei) is heading that way. Any help will be appreciated
yes I have and still the same messageHave you tried disconecting LNB signal cable and restarting ?
I have tried that my friend but still the same messageMost likely a loose connection or short circuit at the LNB/ DiSEqC switch/ decoder. First disconnect everything and re-do your wiring afresh.
Congrats Vicwa [emoji122] [emoji122]Vicwa if you like try and sandwich Eutelsat70B between 76.5e&68.5e. I have done it with immense success. I also succeeded in adding @55e far below Apstar.However setting @57e Ku-band is easy though. At any rate nani amefaulu nss12 c-band jameni?
Besides I also wish to try measat on the same setup coz I like watching CI in hd.
I don't know , but you can modify yourself or find someone to weld it for you.
See my modification that you can adjust and use on a 1.8,2.4 or 3-4m dish. I used galvanized water pipe imported from china because they are light. You can get them at hardware.
View attachment 364403
View attachment 364404
View attachment 364405
#GIDEN, after almost 2 months i was finally able to lock on Intelsat 10-02 @0.8°w C-Band Global Beam but what surprised me most was where i was going wrong. The floor on which the 6ft p.f stands on slopes from right to left and to compensate an Accurate Plumb line i normally place a 14mm square bar beneath the right side of the mounting bottom rim.
Unfortunately, i realized too late that the 14mm square bar was over-shooting ABS-3a beam and i had to replace it with a 10mm square bar. Noticed very active Etv feeds on ABS-3a.
Supermax vh777 Super was able to additionally lock on both NBC & BBC feeds simultaneously unlike Eurostar ESCDT-700 twin that was unable to tri-lock on NBC. After locking & maximizing signal on IS 10-02 @0.8°w, lowering the dish further i locked on Astra 4a @4.8°w C-Band Global Beam.
Thanks for the advice.
It is working but not to my expectations. For example on Tp 12602v 26657 @68e.... Q70% and with a 90cm dish using a cheaper starlife Ku band lnb....Q78% on the same Tp. You have to unscrew the three screws on top section of Ku band and rotate once anticlockwise or till you hit the signal, then tighten the screws.Vicwa, this is great modification. How is c/ku band working here? I bought it last year, made me sweat alot, only few c channels popped. ku channels refused. I decided to abandon it. Any trick?