African Satellite World and Sat Gear

This is for those docked on 72.1E I need some help, can't seem to lock on any of the two Transponders (3724 L 16073 and 3742 L 13930) even with the Teflon inserted. Mates kindly assist, any special settings to input on the STB .

CC GIDEN and Wessly.
 
For now I have after I upgraded from 1.8 to 2.4m. Soap opera in English.
Telenovella @69%
GMA @85%
Bwana vicwa do you live in epicentre of ap*. How come you can get this? I have tried a million times with 2.4 pf & can't manage. Yenyewe wewe ni gwiji.
 
Adjust dish stand so that it can be vertical upright (90 degrees) also lnb holder must be almost parallel to the dish.
 
parabolic-dish.gif


HOW TO FIND LENGTH OF LNB ARM OF A PRIME FOCUS
D = Diametre
F = Focal length (length from centre of dish to the LNB)
d = Depth (of the dish)
D x D = F
16 x d

R = Radius of dish
r = Radius of LNB holder
L = Length of LNB arm
R – r = R1
F – d = H
(R1 x R1) + (H x H) = L squared
L = square root of L squaed

For example, a 6ft(72inches) prime focus dish has a depth of 1ft(12 inches)
The radius of dish = 36 inches , and of lnb holder = 3.25 inches. Calculate :
A. Focal length
B. Length of lnb arm
D = 72
F = ?
d = 12

D x D = F
16 x d
72 x 72 = 27
16 x 12

F = 27
R = 36
r = 3.25
L = ?

R1 = R – r
= 36 – 3.25
= 32.75
H = F – d
= 27 -12
= 15

( R1 x R1) + ( H x H) = L squared
= (32.75 x 32.75) + (15 x 15)
= 1073 + 225
= 1298
L = square root of 1298
L = 36.03 inches
 

Attachments

  • 20160702_100217.jpg
    20160702_100217.jpg
    186.5 KB · Views: 58
  • 20160702_100252.jpg
    20160702_100252.jpg
    201.3 KB · Views: 53
  • 20160702_100301.jpg
    20160702_100301.jpg
    191.7 KB · Views: 58
  • 20160702_100543.jpg
    20160702_100543.jpg
    195.6 KB · Views: 56
Hi ASAS mates, after settling @68.5 for this whole period I decided to check 57e to see if all is well;to my surprise I can't nail my favourite s24 with 1.8m. Am worried as August is fast approaching. Any advice?
you can try it, i manage to do it ,from top is 68 then 64.5 then 57 for s24, location dar es salaam qsat 11 and 23
 

Attachments

  • 20160415_063035.jpg
    20160415_063035.jpg
    147.4 KB · Views: 56
Adjust dish stand so that it can be vertical upright (90 degrees) also lnb holder must be almost parallel to the dish.[

Vicwa.

I will appreciate pictures of your 2.4 m when you add Measat as Giden recommends. Which sats r u getting now?
 
#Potrayed,
Unless its a tuner sensitivity issue, alphabox x4 was introduced as an alternative Pwr@Vu auto-roll satellite decoder. "alphabox x4" & "alphabox" as a brand name has not been in the market for more than 6 months.

Inverto Black Ultra Single LNB works wonders on 130 cm off-set dish & above. With a simple Stargold Single SG100- I Shape LNB and a 90cm off-set dish you can pull down at least 700 channels on Nilesat 201/ Eutelsat 7West A@7.3°w.

Try by mounting the dish on two inter-crossed planks of wood [6"x1"] and secure dish on ground level if possible as compared to wall mounting.

Software upgrade may not solve your problem above but as a reference point download alphabox x4 software here:
Index of ./Alphabox X4mini & X4 HD/
Would mounting a 90cm offset dish on a very straight Eucalyptus pole compromise signal reception in any way?
 
#Potrayed,
Unless its a tuner sensitivity issue, alphabox x4 was introduced as an alternative Pwr@Vu auto-roll satellite decoder. "alphabox x4" & "alphabox" as a brand name has not been in the market for more than 6 months.

Inverto Black Ultra Single LNB works wonders on 130 cm off-set dish & above. With a simple Stargold Single SG100- I Shape LNB and a 90cm off-set dish you can pull down at least 700 channels on Nilesat 201/ Eutelsat 7West A@7.3°w.

Try by mounting the dish on two inter-crossed planks of wood [6"x1"] and secure dish on ground level if possible as compared to wall mounting.

Software upgrade may not solve your problem above but as a reference point download alphabox x4 software here:
Index of ./Alphabox X4mini & X4 HD/
Hi Mr Ras Kush, my alphabox x4 hd does not open animal planet channels@ 68.5 even after the new software upgrade, plz help me if this fault is within your control.
 
Back
Top Bottom