How to pair Bluetooth from iPhone 3GS to other Bluetooth device?

[Lizy]

Naombeni msaada jamani,

Nimejaribu hata kwa iPhone 3G still didn't work, always says searching, but never finds any device.

Something wrong with iPhone 'tooth' or?

 

[Herbalist Dr MziziMkavu]

Naombeni msaada jamani,

Nimejaribu hata kwa iPhone 3G still didn't work, always says searching, but never finds any device.

Something wrong with iPhone 'tooth' or?

How to enable and pair a Bluetooth device to your iPhone 3G.
1. Set your Bluetooth device to discoverable.
2. From the Home screen, select Settings.
3. Select General.
4. Select Bluetooth.
5. Set Bluetooth to On.
6. The iPhone starts searching for Bluetooth devices. It should show up on the screen where you can enter the PIN code. Enter the PIN (usually located in the manual). You should then be ready to use the Bluetooth device with your iPhone

http://www.technipages.com/iphone-3g-pair-bluetooth-device.html

 

[Herbalist Dr MziziMkavu]

Au Jaribu hii
To pair tooth u need to do following:
1. turn off tooth
2. turn off blue tooth function on the iphone
3. push on and hold it on the tooth until solid blue light comes up
4. turn on blue tooth on the iphone, it finds it in 2 sec, password 0000
it worked with with this poster’s Samsung WEP250.
—
it worked with my Motorola H350 where other methods failed – the bluetooth device soundes better too!

 

[Lizy]

Au Jaribu hii
To pair tooth u need to do following:
1. turn off tooth
2. turn off blue tooth function on the iphone
3. push on and hold it on the tooth until solid blue light comes up
4. turn on blue tooth on the iphone, it finds it in 2 sec, password 0000
it worked with with this poster’s Samsung WEP250.
—
it worked with my Motorola H350 where other methods failed – the bluetooth device soundes better too!

Still searching for the past 30min, Grrrrrr

Nokia E71 discovered it, but can not pair.

 

[Herbalist Dr MziziMkavu]

Still searching for the past 30min, Grrrrrr

Nokia E71 discovered it, but can not pair.

Ona Mfano mwengine huu

Connect Nokia E71 Bluetooth Phone to Toshiba Laptop Computer


This tutorial will guide you step-by-step how to connect Nokia E71 bluetooth phone to Toshiba laptop computer running Windows 7 so you can connect to Internet, surf, send emails and other things you want to do.



Connect Bluetooth Phone to Computer

First of all, you might want to set your Nokia E71. Turn on Bluetooth mode by holding down * on the keypad. Set the phone to be visible by other machine by going to menu > connectivity > bluetooth > my phone visibility > shown to all.
After that, the phone is set and you can go to your laptop to connect it. On the laptop, go to Start Menu and navigate to Control Panel. Select Hardware and Sound and Add a Bluetooth device. Follow the instruction on screen. After the driver installed, go to Start > Control Panel > Network and Internet > Connect to the Internet and follow these steps when asked on screen:

1. Select No, create new connection
2. Select Dial U
3. Select Standard Modem over Bluetooth link
4. Enter *99# for dial up phone number
5. Click connect

Once done, go back to your phone and click Accept when you are asked to accept connection to computer.
The last step is pretty obvious, just click Browse the Internet now when the message shows. Connection will appear on the tray icon / list of network connections. Now you are connected to Internet.

 

[Herbalist Dr MziziMkavu]

The Bluetooth pairing device on Nokia E71 is a little bit complicated. Many people had problem pairing the device as it has two ways to access the Bluetooth menu. Firstly, you can go to Menu, Tools, Settings, Connection, Bluetooth, you'll reach a screen that has everything (except the ability to pair a device).
Secondly, you go to Menu, Connectivity, Bluetooth, you'll get the exact same screen, except that you'll have the additional "tab" and be able to pair the device.

 

[Steve Dii]

The Bluetooth pairing device on Nokia E71 is a little bit complicated. Many people had problem pairing the device as it has two ways to access the Bluetooth menu. Firstly, you can go to Menu, Tools, Settings, Connection, Bluetooth, you'll reach a screen that has everything (except the ability to pair a device).
Secondly, you go to Menu, Connectivity, Bluetooth, you'll get the exact same screen, except that you'll have the additional "tab" and be able to pair the device.

Dude, she is having a problem with bluetooth on the iPhone not the E71!!

 

[Steve Dii]

Still searching for the past 30min, Grrrrrr

Nokia E71 discovered it, but can not pair.

The bluetooth component (hardware or software) on your iPhone might be faulty. I suggest you take the phone to your nearest service provider for proper diagnosis.

 

[Herbalist Dr MziziMkavu]

Still searching for the past 30min, Grrrrrr

Nokia E71 discovered it, but can not pair.

Dude, she is having a problem with bluetooth on the iPhone not the E71!!

Dude Umesoma Maelezo yake ya mwisho lakini? Nanukuu haya hapa ( Nokia E71 discovered it, but can not pair) Nilimjibu hilo Swali lake la Mwisho huku nikitafuta Uvumbuzi wa Swali lake la Mwanzo Steve Dii upo pamoja na mimi lakini?

 

[Herbalist Dr MziziMkavu]

Hold down the NoiseAssassin™ button and the Talk button on the Jawbone at the same time for 3 seconds until the LED indicator light flashes red and white alternately. Make sure your pressing the back end of the Jawbone for the NoiseAssassin™ button. This will put the Jawbone into Pairing Mode.Once you have set your iPhone to search for Bluetooth devices and your phone detects the New Jawbone, you have to "add" the device to your phone. by tapping on the "headset" button now showing on the iPhone screen.

It's at this point you should be prompted for the Pass Key. Enter 0000.
Good Luck! http://paulstamatiou.com/review-jawbone-2-bluetooth-earpiece

 

[Herbalist Dr MziziMkavu]

Naombeni msaada jamani,

Nimejaribu hata kwa iPhone 3G still didn't work, always says searching, but never finds any device.

Something wrong with iPhone 'tooth' or?

1. Rest car hands free
   Reset iPhone 3G
   Now your pairing should work.
2. I just got it to work. Follow these steps:
   
   On iPhone:
   1) Go to Settings
   2) Go to Reset
   3) Select "Reset All Setting" (Make sure you save passwords. Data is safe.
   
   On Car:
   Clear all previous pairings.
   Once iPhone reboots, turn on Bluetooth.

 

[Eliphaz the Temanite]

iphone Bluetooth pairing is for accessories like iPhone Bluetooth headset not device to device! Even for apple ipod and Iphone 3GS doesn't work. Usihangaike utapoteza mda wako! Washenzi wakubwa wanataka ku monopolize kila kitu kipitie itune