Dismiss Notice
You are browsing this site as a guest. It takes 2 minutes to CREATE AN ACCOUNT and less than 1 minute to LOGIN

Msaada wa tatizo la WinXP Error

Discussion in 'Tech, Gadgets & Science Forum' started by Mwazange, Jun 13, 2009.

  1. Mwazange

    Mwazange JF-Expert Member

    #1
    Jun 13, 2009
    Joined: Nov 16, 2007
    Messages: 1,044
    Likes Received: 3
    Trophy Points: 135
    Wandugu nimekumbwa na hili tatizo leo.
    Kuna kitu nimefanya which I'm not certain sure ni nini, lakini kwa sasa napata error ifuatayo wakati wa ku-boot computer".
    A problem is preventing Windows from accurately checking the license for this computer. Error Code: 0x80004005"
    Nimejaribu kila namna lakini imeshindikana. Katika pekuapekua zangu mtandaoni nimekutana na link hii hapa.... Nimejaribu kufuata maelekezo yao lakini nakwama kwenye method 2, step five, Inaniambia "The system cannot find the file or directory specified". Kuna mambo muhimu sana natakiwa niyafanye this weekend kutoka humo....Nasogea kando kusikiliza....
    Aksanteni!!
     
  2. MziziMkavu

    MziziMkavu JF-Expert Member

    #2
    Jun 13, 2009
    Joined: Feb 3, 2009
    Messages: 38,529
    Likes Received: 2,800
    Trophy Points: 280
    "Error Code: 0x80004005" error message when you install Windows XP

    SUMMARY When you install Microsoft Windows XP or activate the operating system, you may receive an error message. This problem may occur if an antivirus program interferes with the installation or if a Windows Product Activation file is manually modified. This article describes two possible ways to resolve this problem.

    When you install Microsoft Windows XP, or when you try to activate the operating system immediately after you install Windows XP, you may receive the following error message: A problem is preventing Windows from accurately checking the license for this computer. Error Code: 0x80004005

    CAUSE This problem may occur if a file that the Windows Product Activation requires is damaged or missing. This condition may be related to one or both of the following conditions:


    • A third-party backup utility or an antivirus program interferes with the installation of Windows XP.
    • A file that Windows Product Activation requires is manually modified.

    RESOLUTION To resolve this problem, use either of the following methods:



    Method 1

    Note Follow this method if this error occurred after an upgrade from Windows 98 Second Edition.

    Boot from the Windows XP CD-ROM, and then perform an in-place upgrade repair and use a valid product key.
    For more information, click the following article number to view the article in the Microsoft Knowledge Base: 315341 (How to perform an in-place upgrade (reinstallation) of Windows XP ) How to perform an in-place upgrade (reinstallation) of Windows XP

    You can also resolve this problem by uninstalling Windows XP and reinstalling the operating system that you were running before you upgraded to Windows XP. For more information, click the following article number to view the article in the Microsoft Knowledge Base: 312569 (How to manually start the removal process to remove Windows XP ) How to manually start the uninstall process to remove Windows XP

    Method 2

    To resolve the problem, repair the installation of Microsoft Windows XP by using the Windows XP CD, and then replace the files. To do so, follow these steps:
    1. Insert the Windows XP CD in the CD drive or DVD drive, and then restart your computer. When you receive the following message, press a key to start your computer from the Windows XP CD: Press any key to boot from CD

      Note Your computer must be configured to start from the CD drive or DVD drive. For more information about how to configure your computer to start from the CD drive or DVD drive, see the documentation that came with your personal computer or contact the manufacturer.
    2. When you receive the following message, press R to start the Recovery Console:This portion of the Setup program prepares Microsoft Windows XP to run on your computer:

      To set up Windows XP now, press ENTER.

      To repair a Windows XP installation by using Recovery Console, press R.

      To quit Setup without installing Windows XP, press F3.
    3. Press 1 to access your primary drive installation with Recovery Console.
    4. When you are prompted to do so, type the administrator password. If you have not set an administrator password, press ENTER to continue.
    5. Type cd %SystemRoot%\System32, and then press ENTER.
    6. Rename the following files by using the REN command. To do so, follow this syntax: REN file_name.extension file_name.old
      • Wpa.dbl
      • Pidgen.dll
      • Actshell.html
      • Licdll.dll
      • Regwizc.dll
      • Licwmi.dll
      • Wpabaln.exe
    7. Type the drive letter of your CD-ROM drive followed by a colon (for example, "D:"), and then press ENTER.
    8. Type cd i386, and press ENTER.
    9. Type the following commands one at a time. Press ENTER after each command:
      • expand licwmi.dl_ %systemroot%\system32
      • expand regwizc.dl_ %systemroot%\system32
      • expand licdll.dl_ %systemroot%\system32
      • expand wpabaln.ex_ %systemroot%\system32
      • expand wpa.db_ %systemroot%\system32
      • expand actshell.ht_ %systemroot%\system32
      • copy pidgen.dll %systemroot%\system32
    10. Type Exit and press ENTER to restart the computer. "Error Code: 0x80004005" error message when you install Windows XP
     
  3. Mwazange

    Mwazange JF-Expert Member

    #3
    Jun 13, 2009
    Joined: Nov 16, 2007
    Messages: 1,044
    Likes Received: 3
    Trophy Points: 135
    Mkuu ndio procedure yenyewe niliyoifuata lakini nikifika step hii "Type cd %SystemRoot%\System32, and then press ENTER." napata error...nimejaribu kuweka space btn cd na % lakini wapi sasa nashindwa kuelewa tatizo ni nini hapo.
     
  4. MziziMkavu

    MziziMkavu JF-Expert Member

    #4
    Jun 13, 2009
    Joined: Feb 3, 2009
    Messages: 38,529
    Likes Received: 2,800
    Trophy Points: 280
    Haya Mwanzange Fuatilia hii nyingine Namna ya Ku Repair Windows Xp

    One of the best kept secrets of Windows XP is it's built in repair feature!

    In previous versions of Windows, correcting an operating system error, or installing a new motherboard, usually meant formating and reinstalling, resulting in loss of all data. Don't worry; Windows XP repair feature won't delete your data, installed programs, personal information, or settings. It just repairs the operating system!

    Note: The system repair function will remove any updates you have previously installed that are not included on the CD. Drivers will also be reverted to their original XP versions, as well as some settings (network & performance settings may sometimes be reset to their defaults). It may be necessary to reactivate your Windows XP as well. When finished, you will have to download all of the updates from Microsoft Windows Update, because they are all replaced during repair.

    Why would I want to reinstall Windows XP?
    1) Can't start Windows XP in safe mode.
    2) You have problems caused by a recently installed system update (Windows Update, hotfix, Windows XP service pack, or Microsoft Internet Explorer update).
    3) Your problems can't be solved with system restore, or you can't access system restore.
    4) You've installed a new motherboard, or made other major hardware changes and need to reinstall Windows.

    Let's get started!

    Step 1: Rule out hardware issues. Windows Repair will only fix software problems. Hardware issues can also cause boot problems (i.e. bad hard drive, memory, CPU, or power supply).

    Step 2: Backup. It's always a good idea to backup your important data before making changes to Windows XP. Relax, if you follow these instructions your data will be perfectly safe.

    Step 3: Boot from your Windows XP CD. Insert the Windows XP CD into your computer's CD-ROM or DVD-ROM drive, and then restart your computer. When the "Press any key to boot from CD" message appears on the screen, press a key to start your computer from the Windows XP CD. Can't boot from your CD? Please see the note at the bottom of this page (Configuring Your Computer to Boot from CD).

    Step 4: A blue screen will appear and begin loading Windows XP Setup from the CD.

    Note: RAID/SCSI/Unsupported UDMA users:
    You will be prompted to "press F6 to install any third party SCSI or RAID drivers". Most users will not have to press F6, but if you are running RAID, SCSI or unsupported UDMA controllers, then you will have to have your controller drivers on a floppy disk. If you are unsure whether you have RAID/SCSI, then simply let the CD load without pressing F6.

    When completed loading files, you will be presented with the following "Windows Setup" screen, and your first option. Select "To set up Windows XP now, press ENTER". DO NOT select Recovery Console.

    [​IMG]




    When presented with the screen below. press the F8 key to continue.

    [​IMG]




    Next, Windows Setup will find existing Windows XP installations. You will be asked to repair an existing XP installation, or install a fresh copy of Windows XP.

    If no installations are found, then you will not be given the option to repair. This may happen if the data or partition on your drive is too corrupted.

    Note: If you install a fresh copy, all data on that partition will be lost!

    [​IMG]




    Your almost finished! Windows XP will appear to be installing itself for the first time, but it will retain all of your data and settings. Just follow the prompts, and have your CD-KEY ready if needed.

    Do you have more than one system, or lost your CD-KEY? Visit the keyfinder page to retrieve your CD-KEY.

    Update: Due to the proliferation of the Blaster and Welchia Worm/Virus be aware that a Repair Install will leave your system vulnerable. You can get infected within seconds. Do not go on line until you have enabled XP's firewall first.

    Remember to run Windows Update! (install critical updates first)

    -----------------------------

    Configuring Your Computer to Boot from CD

    Many computers are not configured to boot from the CDROM. If you cannot boot from the CDROM, this is probably due to the boot order of your devices being incorrect. You can change this in the BIOS.

    You enter the BIOS from the first screen you see when you turn your computer on. To enter your BIOS, most users here will press the DEL key.

    Most Dell, Toshiba, Gateway, Sony & HP systems will press F2.

    Compaq users will usually have to press F10.

    IBM typically uses F1 or F2.

    Other brands may have different keys to press to enter setup, F1, F2, Del, Tab and CTRL+S. If possible see the manual for your computer or motherboard. Also, the BIOS will usually display which button to press to "enter setup" during POST (if it flashes by too fast, press the Pause key).

    When you enter the BIOS setup, you need to change the boot order. The CDROM should be setup before the Hard Drive. Each BIOS is different, but here is an example:

    [​IMG]

    Note: If you need assistance with a repair installation, please start a new topic in our Windows XP Forum. This topic is also open for comments, but not all will receive a reply.

    IMPORTANT NOTE: After running a repair, you may find that Windows Update refuses to install the most recent 80 patches. This is because the latest version of Windows Update is broken, and doesn't register some DLLs if they're previously been registered (as happens with a repair install). Here's a work around until they get it fixed:
    1. Stop the Automatic Updates service. To do this, follow these steps:
      1. Click Start, click Run, type cmd, and then click OK.
      2. At the command prompt, type the following commands, and then press ENTER after each command:
        net stop wuauserv
        exit
    2. Register the file that is used by Windows Update and Microsoft Update. To do this, follow these steps:
      1. Click Start, click Run, type cmd, and then click OK.
      2. At the command prompt, type the following command, press ENTER after the command, and then click OK when you receive a verification message:
        regsvr32 %windir%\system32\wups2.dll
        Note: for x64 machines regsvr32 %windir%\syswow64\wups2.dll
    3. Start the Automatic Updates service. To do this, follow these steps:
      1. Click Start, click Run, type cmd, and then click OK.
      2. At the command prompt, type the following commands, and then press ENTER after each command:
        net start wuauserv
        exit
    New knowledge base article on this issue, and a post on the Microsoft Update Blog. How-to repair Windows XP
     
  5. Mwazange

    Mwazange JF-Expert Member

    #5
    Jun 13, 2009
    Joined: Nov 16, 2007
    Messages: 1,044
    Likes Received: 3
    Trophy Points: 135
    Nimejaribu mzee hii idea yako ya pili, lakini naona mashine ina reboot and reboot and reboot, hadi niandikapo hapa sasa hizi imeshaboot kama mara tano hivi, naona we got another problem in our hands. Halafu every other time napata error " c000021a {Fatal system error} Beginning dump of physical memory." Kuna kitu nimemisi hapo??
     
  6. MziziMkavu

    MziziMkavu JF-Expert Member

    #6
    Jun 13, 2009
    Joined: Feb 3, 2009
    Messages: 38,529
    Likes Received: 2,800
    Trophy Points: 280
    Jaribu Kuiformat Computer yako. Tafadhali lakini uwe na Cd Ya Windows Xp na iwe nzuri isiwe na mikwaruzo ndani ya hiyo CD na Fuatilia Namna ya KuFormat.
    [​IMG]How To Format a Computer Using a Windows XP disc

    By Mitz
    Also see Why should you format your computer and what does it mean?

    The word Format can mean quite a few things in the world of computers. You could format text in a word document, have a different file format, or in this case, format the hard drive in your computer. Sometimes you need to format to ultra clean your computer. It makes it faster, new looking and gets rid of errors and viruses.


    Windows XP disc is bootable and really does everything for you. (Well nearly) This means that when you insert a Windows XP disc into your computer, it should start automatically.


    However before you do format a computer you should backup your data. Some things to backup include: photos, my documents, favourites folder, emails, all contacts, passwords and more....Go and check out my backup list.


    Next is to make sure you have a system disk that came with your computer for display drivers, LAN drivers, USB, audio etc. If you do not have this there is a program called XP tools which grabs your drivers and makes them into an exe file...It is a lifesaver.


    So when you have formatted your computer, you press on this exe file and your drivers are restored. However if you do not want to spend money you will have to find your computers drivers on the internet and download them. Here is where to find drivers.

    How to Format a computer using a Windows XP disc


    1. First you must put your Windows XP CD in the drive.
    2. Then restart your computer.
    3. When it says press any key to boot from cd, Press any key on the keyboard. (Go to step 6)
    4. If it doesn't ask you this then restart your computer again.
    5. Go into the BIOS settings of your PC, usually by pressing the F1, F2, F10, or maybe the delete key. If you are not sure watch the screen at startup and it will say "To enter setup press.......". You have to be quick and press it. If you miss it restart again. Once you are in the bios you have to change the boot options. You have to make your cd rom the first boot option. Save and exit.
    6. A blue screen will appear and you are on your way..
    [​IMG]

    1. Press Enter to setup Windows XP now. See screenshot above.
    2. If there is a copy of Windows XP on your computer and you wish to overwrite it you will have to press the escape button when prompted. (screenshot below) Do not install Windows XP in another directory unless you know what you are doing. Just overwrite the previous version as you should have backed up your data anyway.
    [​IMG]

    1. You should now make the partition that had windows on it blue and press D to delete the partition. It will ask if you are sure. Press L to confirm. More details on deleting partitions.
    2. Then Press C to create another partition and Windows will estimate a size for you. If you wanted to partition your hard drive into two equal parts you would have to do some math's and then type the appropriate number in. Otherwise just going with what Windows puts there will be the minimum partition size.
    3. Press Enter to confirm size.
    4. Then it will ask you which partition you want to install Windows on. The default is C: drive. Select this by making it blue and press enter.
    5. If there are no partitions it will create one for you.
    6. Then it will ask you to format quick, normal, in fat32 or NTFS. Fat32 suits older computers so I choose a quick format with NTFS. Quick or Slow is fine. If you had errors it is better to use a slow format which can also be known as a low level format.
    7. From now on you just Follow the prompts and let it go..
    8. The computer will restart and it will try to boot from cd again...Do not press anything on the keyboard.. Just let it go through the stages of setup.
    9. Make sure you have your serial number ready to enter in. This can be found on your coa certificate which is a sticker usually put on the side of your computer.
    10. Do not remove the Windows XP CD until the computer has started up with a new desktop and icons.
    Now the next process begins.. Installing your device drivers for your computer. See What are Device Drivers and why do I need them for my computer?
    [​IMG]
    Anymore questions ask Mitz
    BIOS How to get there and change settings
    NOTES

    • Follow the instructions carefully. Once you have done this a few times, you will see how easy it is.
    • The only way to learn is to try it yourself.
    • Be very careful not to make mistakes as restarting this process over and over can corrupt your computer. If you do make a mistake, try pressing the escape button as it can sometimes take you back to the previous screen.
    • If you cannot proceed through the format process, maybe you did not delete the old partition??
    • If there is more than one partition on your hard drive you can just format the one that has the previous version of Windows on it. That way the data on the other partition will be safe.
    • After errors ad viruses have been found on your computer, you should format a computer on on low level format , and not a quick format.
    • You can also go to the Microsoft website for more information. How to partition and format a hard disk by using Windows XP Setup program You can get all the information from this site, however it can be very confusing for most people, including me!!! Bonyeza hapa Format Windows - How To Format a Computer Using a Windows XP disc
     
  7. Mwazange

    Mwazange JF-Expert Member

    #7
    Jun 13, 2009
    Joined: Nov 16, 2007
    Messages: 1,044
    Likes Received: 3
    Trophy Points: 135
    Mkulu si nimesema mwanzo kabla ya kuformat inabidi niacseess makabrasha yaliyomo humo kwanza. Ndio unga wa watoto huo mkulu....
     
  8. MziziMkavu

    MziziMkavu JF-Expert Member

    #8
    Jun 13, 2009
    Joined: Feb 3, 2009
    Messages: 38,529
    Likes Received: 2,800
    Trophy Points: 280
    Mwanzange jaribu hiii basi kisha unieleze umefikia wapi? na pia angalia hiyo CD yako ya Windows Xp ni nzuri? Haina Mikwaruzo Mikwaruzo?
    How to troubleshoot a "STOP 0xC000021A" error


    CAUSE The STOP 0xC000021A error occurs when either Winlogon.exe or Csrss.exe fails. When the Windows NT kernel detects that either of these processes has stopped, it stops the system and raises the STOP 0xC000021A error. This error may have several causes. Among them are the following:


    • Mismatched system files have been installed.
    • A Service Pack installation has failed.
    • A backup program that is used to restore a hard disk did not correctly restore files that may have been in use.
    • An incompatible third-party program has been installed.

    RESOLUTION To troubleshoot this problem, you must determine which of these processes failed and why.

    To determine which process failed, register Dr. Watson as the default system debugger (if it is not already the default debugger). Dr. Watson for Windows NT logs diagnostic information about process failures to a log file (Drwtsn32.log). Also, you can configure this program to produce memory dump files of failed processes that you can analyze in a debugger to determine why a process fails.

    To set up Dr. Watson to trap user-mode program errors, follow these steps:



    1. At a command prompt, type System Root\System32\Drwtsn32.exe -I, and then press ENTER.

      This command configures Dr. Watson as the default system debugger.
    2. At a command prompt, type System Root\System32\Drwtsn32.exe, and then select the following options:Append to existing log file
      Create crash dump
      Visual Notification
    3. After the computer restarts from the STOP 0xC000021A error, run Dr. Watson (Drwtsn32.exe).
    4. View the Dr. Watson log to determine what user mode process may be causing the problem.
    5. If the Dr. Watson log does not contain sufficient information to determine the cause of the problem, analyze the User.dmp file to determine the cause of the STOP 0xC000021A error.

      If Dr. Watson did not create a User.dmp file for either Winlogon.exe or Csrss.exe, you may have to use a different tool to generate a memory dump file of the process that fails. For more information, click the following article number to view the article in the Microsoft Knowledge Base: 241215 (How to use the Userdump.exe tool to create a dump file ) How to use the Userdump.exe tool to create a dump file
      Note Follow the instructions in the Knowledge Base article to troubleshoot a process that shuts down with an exception. While you follow these instructions, monitor the following processes to troubleshoot the STOP 0xC000021A error:
      • Winlogon.exe
      • Csrss.exe
      Note Most STOP 0xC000021A errors occur because Winlogon.exe fails. This typically occurs because of a faulty third-party Graphical Identification and Authentication (GINA) DLL. The GINA is a replaceable DLL component that Winlogon.exe loads. The GINA implements the authentication policy of the interactive logon model. The GINA performs all identification and authentication user interactions.
    It is very common for certain types of remote control software to replace the default Windows GINA DLL (Msgina.dll). Therefore, a good first step is to examine the system to see if it has a third-party GINA DLL. To do this, locate the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
    Value = GinaDLL REG_SZ


    • If the Gina DLL value is present and if it is anything other than Msgina.dll, it probably means that a third-party product has changed this value.
    • If this value is not present, the system uses Msgina.dll as the default GINA DLL.
    If this error first occurred after the installation of a new or updated device driver, system service, or third-party program, the new software should be removed or disabled. Contact the manufacturer of the software to see if an update is available. For more information about hardware and software vendor contact information, visit the following Microsoft Web site: - Hardware and software vendor contact information (Hardware and software vendor contact information)
    Last known good configuration

    If the previous steps in this article do not resolve the problem, start the computer by using the last known good configuration. To start the computer by using the last known good configuration, follow these steps:Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.
    1. Click Start, and then click Shut Down.
    2. Click Restart, and then click OK.
    3. Press F8 at the indicated time:
      • For an x86-based computer: When a screen of text appears and then disappears , press F8. (The screen of text may include a memory test, lines about the BIOS, and other lines.) There may also be a prompt that tells you when to press F8.
      • For an Itanium architecture-based computer: After you make your selection from the boot menu, press F8. There may be a prompt that tells you when to press F8.
    4. Use the arrow keys to select Last Known Good Configuration, and then press ENTER.

      NUM LOCK must be off before the arrow keys on the numeric keypad will function.
    5. Use the arrow keys to highlight an operating system, and then press ENTER.
    Notes
    • Choosing the Last Known Good Configuration startup option provides a way to recover from problems such as a newly added driver that may be incorrect for your hardware. However, it does not solve problems that are caused by corrupted or missing drivers or files.
    • When you choose the Last Known Good Configuration option, only the information in registry key HKLM\System\CurrentControlSet is restored. Any changes you have made in other registry keys remain.
    In-place upgrade

    If the previous steps in this article do not resolve the problem, perform an in-place upgrade. For more information about how to do this,, click the following article numbers to view the articles in the Microsoft Knowledge Base: 292175 (How to perform an in-place upgrade of Windows 2000 ) How to perform an in-place upgrade of Windows 2000
    315341 (How to perform an in-place upgrade (reinstallation) of Windows XP ) How to perform an in-place upgrade (reinstallation) of Windows XP
    816579 (How to Perform an In-Place Upgrade of Windows Server 2003 ) How to perform an in-place upgrade of Windows Server 2003
    Remove incompatible software by using the Recovery Console

    If the previous steps in this article do not resolve the problem, remove incompatible software by using the Recovery Console. Complete steps that describe how to do this are beyond the scope of this article. However, you may be able to use the following articles as guidelines for performing this procedure. 313670 (How To Replace a Driver by Using Recovery Console in Windows 2000 ) How to replace a driver by using Recovery Console in Windows 2000
    816104 (How to replace a driver by using Recovery Console in Windows Server 2003 ) How to replace a driver by using Recovery Console in Windows Server 2003
    326215 (How To Use the Recovery Console on a Windows Server 2003-Based Computer That Does Not Start ) How to use the Recovery Console on a Windows Server 2003-based computer that does not start
    229716 (Description of the Windows 2000 Recovery Console ) Description of the Windows 2000 Recovery Console
    307654 (How to install and use the Recovery Console in Windows XP ) How to install and use the Recovery Console in Windows XP
    307545 (How to recover from a corrupted registry that prevents Windows XP from starting ) How to recover from a corrupted registry that prevents Windows XP from starting
    216417 (How to install the Windows Recovery Console ) How to install the Windows Recovery Console How to troubleshoot a "STOP 0xC000021A" error
     
  9. Mwazange

    Mwazange JF-Expert Member

    #9
    Jun 13, 2009
    Joined: Nov 16, 2007
    Messages: 1,044
    Likes Received: 3
    Trophy Points: 135
    Nashukuru sana mkulu kwa mainfo lakini nilichofacha mimi baada ya kuzenguana nayo usiku kucha ni kuwa niliweza kuipartition hard drive, nikainstall xp nyingine kwenye hicho kipande kingine bila ya kukiformat kipande cha kwanza then nikaboot...ikakubali....nikaenda kwenye drive ya zamani nikayakopi makabrasha yooote niliyokuwa natokwa na jasho kuyapata, then nikaenda kupiga mbavu. Toka nilipoamka leo mchana niko mbioni kumaliza projects za watu kwanza ambazo ziko due jumatatu, then itabidi niirudie mashine kuirudisha kwenye hali yake ya kawaida...Yaani OS moja na drive moja.....
    Nikifikia hapo nitajaribu kuwafahamisha nilipo. Kama kuna kaushauri nasaha kuhusiana na kuziunganisha drive mbili bila ya kizungumkuti.....always is welcomed.....
    Again aksante mkulu.....
     
  10. MziziMkavu

    MziziMkavu JF-Expert Member

    #10
    Jun 15, 2009
    Joined: Feb 3, 2009
    Messages: 38,529
    Likes Received: 2,800
    Trophy Points: 280
    Njia nzuri ukimaliza Mafaili uliyokuwa nayo kwenye hiyo Computer yako bora Uiformat kuwa na Windows Xp moja iliyokuwa fresh na kopi mafaili yako kwenye USB AU CD kwa kutumia Nero kisha ndio Uiformat upya itakuwa jambo nzuri kwako unasemaje?
     
  11. M

    Manitoba JF-Expert Member

    #11
    Jun 15, 2009
    Joined: Jul 8, 2008
    Messages: 240
    Likes Received: 2
    Trophy Points: 0
    Ukipata matatizo ya hard disk, na kama umefanikiwa kupata access ya command prompt (either kwenye computer hiyo hiyo, au kwa kuipachika hiyo hd kwenye computer nyingine), type hii kitu kabla hujaendelea na kingine. Inaweza ikakupunguzia sana maumivu ya kichwa wakati unaendelea na steps nyingine.

    chkdsk [drive letter] /f /r

    Kwa mfano:
    chkdsk D: /f /r
     
  12. Mwazange

    Mwazange JF-Expert Member

    #12
    Jun 16, 2009
    Joined: Nov 16, 2007
    Messages: 1,044
    Likes Received: 3
    Trophy Points: 135
    Huo ndio mpango mkuu nilionao maana inakera kuwa na drives mbili zinakukodolea macho....na vile vile ilinibidi nifanye drive partioning kwa jamu ili kupata kanafasi kwenye kadrive kapya...nitatafuta muda nikae chini nifanye hiyo shughuli mkuu...
     
  13. Pentest

    Pentest Member

    #13
    Jun 16, 2009
    Joined: Jun 16, 2009
    Messages: 42
    Likes Received: 0
    Trophy Points: 0
    Next time usikimbilie kuformat machine. normal XP kama ni preloaded unaweza uka restore instead kuformat.
    option ya kuformat iwe last chance.
    unachokatiwa ni kwenda kwenye start, type restore then utaonyesha date ambayo unafikiri kuwa hilo tatizo lilianza lini. unachagua tarehe ya yeyote na time ukiwa unauhakika si muda ambao tatizo limeanza.

    wala usiwe na wasiwasi na data zako kama zitapotea, kitakacho potea ni kama uliinstall chochote ndicho kitakacho potea.
    mfano...una restore kama tarehe 01/06/09 na tatizo limeanza tarehe 14/06/09 inamaana kuwa data zako zote zitakuwepo hata zile ulizo fanya soon kabla ya tatizo. ila tu kama uliinstall any application ndiyo itakayo kuwa imepotea. hata hivyo hiyo huwa ni rahisi ku reinstall.

    hope utafanikiwa next time you have same problems.

    rgrd
    Pentest
     
Loading...